winter Project ''project 9'' by Evodan2004.
#155
the hole rear of the car is COMPLETE. everything is installed. it all looks so nice i do not think i am going to drive the car ever again.
#157
i hope not. lol
anyone want to help me real quick and peak under there car? need a hand.
look at the rear where the drive shaft connects to the rear. 4 bolts hold that up. what side is it washer and nut on. front side facing the drive shaft or rear side facing the rear diff.
lastly
look at your lower control arms. the adjustment nut that you adjust that also connects the lower control arm to the Aluminum sub frame. what way is the nut and washer facing. front or rear of the car.
other then this im done back here. thanks the the one who can take a peek.
#160
Evolving Member
iTrader: (43)
Join Date: Aug 2009
Location: Pine Bush, NY
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
On the driveshaft, the bolts go from front to back with the washers and nuts on the back towards the rear diff. The lower control arm bolts go the exact same way. With the washers and nuts facing the rear.
#162
Evolving Member
What kind of tires are you running? I run Toyo Proxes RA1s and I drop the pressure down to around 22 or so and have had a best 60 foot of 1.49. They are a little expensive but are some damn good tires