View Poll Results: What Upgraded Stock Frame Turbo are you Currently Running??
FP BLACK
71
32.87%
FP RED
52
24.07%
FP GREEN HTA
20
9.26%
FP GREEN
20
9.26%
FP WHITE
3
1.39%
CBRD BBK Full
30
13.89%
CBRD BBK Lite
2
0.93%
HKS 7460
18
8.33%
Voters: 216. You may not vote on this poll
Stock Frame Turbo Owners.. Step up and NAME your Turbo!!!!
#33
Not really too shocked to see the FP Black on TOP since it does make the most power.. Whats shocking to me is to see 6 HKS turbos posted up. HKS must have sold a lot more kits than i thought.. Its a very nice complete turbo kit for the $$$..
Come on Guys there are more of you not voting in the poll.. With 670 views post what you guys are running!!!
Come on Guys there are more of you not voting in the poll.. With 670 views post what you guys are running!!!
Last edited by AWD Motorsports; Nov 23, 2010 at 10:48 AM.
#34
This is exact same reason i stayed with red on my rebuilt. Damn 6 speed....
#38
Evolved Member
iTrader: (51)
Join Date: Feb 2010
Location: San Antonio
Posts: 1,640
Likes: 0
Received 0 Likes
on
0 Posts
I just got an FP Black...
Plan on running it on the stock block. Im not certain if im going to since i know i wont be able to push it to its limits. I might just go ahead and build the block for assurance and safety... only time will tell
Plan on running it on the stock block. Im not certain if im going to since i know i wont be able to push it to its limits. I might just go ahead and build the block for assurance and safety... only time will tell
Last edited by LGshow19; Nov 23, 2010 at 02:15 PM.
#43
Account Disabled
iTrader: (60)
Just an FYI, since not everyone is going to vote.
We have 430 (plus or minus) BBK variants out worldwide.. (about 30-40 of those are lites)....
That is quite a few, since we have been selling them for around 2 years... and we are more than happy with that. I'm sure FP has shipped more... their name was associated with these cars (dsm etc) before CBRD was a recognized brand... we were still busy racing at the time..
Cheers
cb
We have 430 (plus or minus) BBK variants out worldwide.. (about 30-40 of those are lites)....
That is quite a few, since we have been selling them for around 2 years... and we are more than happy with that. I'm sure FP has shipped more... their name was associated with these cars (dsm etc) before CBRD was a recognized brand... we were still busy racing at the time..
Cheers
cb
#44
Just an FYI, since not everyone is going to vote.
We have 430 (plus or minus) BBK variants out worldwide.. (about 30-40 of those are lites)....
That is quite a few, since we have been selling them for around 2 years... and we are more than happy with that. I'm sure FP has shipped more... their name was associated with these cars (dsm etc) before CBRD was a recognized brand... we were still busy racing at the time..
Cheers
cb
We have 430 (plus or minus) BBK variants out worldwide.. (about 30-40 of those are lites)....
That is quite a few, since we have been selling them for around 2 years... and we are more than happy with that. I'm sure FP has shipped more... their name was associated with these cars (dsm etc) before CBRD was a recognized brand... we were still busy racing at the time..
Cheers
cb
Mike
Last edited by AWD Motorsports; Nov 23, 2010 at 03:11 PM.
#45
Evolved Member
iTrader: (12)
Join Date: Aug 2009
Location: ma
Posts: 1,589
Likes: 0
Received 0 Likes
on
0 Posts
"Our Stage III turbo kit for the EVO8 (aka "Stealth kit") Version 2
After months of testing and development with the EVO8 engine combination, we have devised an upgrade system that is both elegant and simplistic while accepting no compromises in power potential or reliability. With POWER and RELIABILITY being the two key criteria for the development of the EVO8 turbo upgrade kit, we set out to test every possible hardware combination available. In our kit, you will find a system that integrates a plethora of unique but well designed components that compliment each other to achieve those two things that you care about most. In addition, in an attempt to exceed the customers' expections we have added other features such as a "direct-bolt-up" housing that overcomes the "reverse-rotation" issue, v-band downpipe discharge, bolt-up oil/coolant kits, etc. in order to make the installation process as simple as possible. All this while retaining the appearance of a completely stock engine bay.
The kit hardware will consist of the following:
- Garrett Prototype GT Ball Bearing turbo w/ATP Proprietary Housing with GT inspired High-Flowing Valute
- Bolt-in design retains stock manifold - Retains stock heatshield for OEM appearance
- Steel braided lines and fittings for oil/coolant connections
- Tial 44mm External Wastegate
- Stainless wastegate discharge tube with downpipe re-route
- Silicone connectors and clamps
- All mounting hardware, gaskets and CNC machined fittings
- 600 crank HP utilizing the ultra efficient GT35R (aka GT35/40R)
- 3.0" Stainless steel downpipe w/stainless O2 housing
- 100% bolt-on design. No welding, cutting, or fabrication"