FP-Black and stock 6-Spd......will it blend?
#17
Evolved Member
iTrader: (31)
Join Date: Jan 2007
Location: Under my car
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
Actully its the recommned min boost level to operate and its starts to open and that is from Bran the Tech the Black only starts and gets nastier the more its pushed I have see it goto 40psi and become almost undriveable.
Last edited by BEISSEN; Nov 25, 2010 at 07:12 AM.
#18
Account Disabled
iTrader: (6)
Join Date: Mar 2006
Location: NYC
Posts: 500
Likes: 0
Received 0 Likes
on
0 Posts
Using the 6spd with black makes it a nasty combo due to the short ratio's in the tranny will smack harder..When I had the black it really woke up at 28 psi anything below that was a bit weak you have to remember that it's a stock frame turbo with a small back housing and requires lots of boost to wake it up.
#19
Newbie
Thread Starter
Join Date: Apr 2010
Location: Austria
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
So would all of you 6-spd users with more than 420whp, who have not yet experienced any problems, please stand up and let me know.... so i can sleep better!
How are you using the car?
how much milage so far with that power?
best regards,
Luke
How are you using the car?
how much milage so far with that power?
best regards,
Luke
#20
Evolved Member
iTrader: (31)
Join Date: Jan 2007
Location: Under my car
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
Keep it cooled down and don't drag it to hard meaning dumping the clutch and you will be ok more then likely. It wont take the abuse of a stock 5 speed but it can last if you maintain awareness. But in the end you have to pay to play.
Thread
Thread Starter
Forum
Replies
Last Post
MagicManRed
Evo Engine / Turbo / Drivetrain
596
Dec 9, 2020 07:59 AM