Just installed catch can. Lots of oil!!!
#1
Evolved Member
Thread Starter
iTrader: (8)
Join Date: May 2003
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Just installed catch can. Lots of oil!!!
Took off MAS pipe to put the buschur one on and the pipe had a LOT of oil on it and had some right by the turbo. Bought a greddy catch can. Install was simple. heres the pic.
Also I changed the tranny, transfer, diff with redline. Feels great. Drain plug had a lot of metal
Also I changed the tranny, transfer, diff with redline. Feels great. Drain plug had a lot of metal
#2
Evolved Member
Thread Starter
iTrader: (8)
Join Date: May 2003
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Lots of metal. This is the plug from the transmission. Transfer case didnt have much on it. Very surprised to see all that metal just clumped up like that. Anybody that wants to change fluids. It is very easy. Took about 30 mins. with a pump
#5
Evolved Member
Thread Starter
iTrader: (8)
Join Date: May 2003
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Drove hard today and noticed that the clear tube had some oil in. This thing does serve a purpose after all. Everybody who says we dont need one. Read my last sentance and tell me again why we dont need it?
Last edited by w2pac12345; Dec 8, 2003 at 11:55 PM.
#6
I have a catch can on mine and I also integrated the PCV system to pull a vacuum on the can off boost and use the inlet hose to evacuate the can on boost. So far it is working well for me.
I don't know if you saw my old post with the diagram or not.
Point to all this is, with this setup I can half fill the can with simple condensation in about 2000 miles. I don't get too much oil in that time but the water kind of dilutes the oil so it's harder to tell.
I have no doubt about the value of a catch can and think it is highly recommended.
Oh, is that a Buschur I/C pipe in your pic? I am looking at that in the future and that shows me that the current setup I have below will give me the necessary clearance for that pipe.
I don't know if you saw my old post with the diagram or not.
Point to all this is, with this setup I can half fill the can with simple condensation in about 2000 miles. I don't get too much oil in that time but the water kind of dilutes the oil so it's harder to tell.
I have no doubt about the value of a catch can and think it is highly recommended.
![Thumbs Up](https://www.evolutionm.net/forums/images/smilies/smilie_thumbsup.gif)
Oh, is that a Buschur I/C pipe in your pic? I am looking at that in the future and that shows me that the current setup I have below will give me the necessary clearance for that pipe.
#7
Evolved Member
Thread Starter
iTrader: (8)
Join Date: May 2003
Posts: 825
Likes: 0
Received 0 Likes
on
0 Posts
Yes that is the buschur upper IC pipe. I see you took your batt tray off. I kept mine there cuz I put all my tools on it when working. LOL. Where is your + batt connection going into the engine? Can you post sum pics here or e-mail them to me
w2pac12345@aol.com
I just have a wire going to the stock area as you can see in the pic, but I am not too happy about where it is.
w2pac12345@aol.com
I just have a wire going to the stock area as you can see in the pic, but I am not too happy about where it is.
Trending Topics
#8
EvoM Guru
iTrader: (7)
Originally posted by w2pac12345
Lots of metal. This is the plug from the transmission. Transfer case didnt have much on it. Very surprised to see all that metal just clumped up like that. Anybody that wants to change fluids. It is very easy. Took about 30 mins. with a pump
Lots of metal. This is the plug from the transmission. Transfer case didnt have much on it. Very surprised to see all that metal just clumped up like that. Anybody that wants to change fluids. It is very easy. Took about 30 mins. with a pump
#10
Originally posted by w2pac12345
Yes that is the buschur upper IC pipe. I see you took your batt tray off. I kept mine there cuz I put all my tools on it when working. LOL. Where is your + batt connection going into the engine? Can you post sum pics here or e-mail them to me
w2pac12345@aol.com
I just have a wire going to the stock area as you can see in the pic, but I am not too happy about where it is.
Yes that is the buschur upper IC pipe. I see you took your batt tray off. I kept mine there cuz I put all my tools on it when working. LOL. Where is your + batt connection going into the engine? Can you post sum pics here or e-mail them to me
w2pac12345@aol.com
I just have a wire going to the stock area as you can see in the pic, but I am not too happy about where it is.
https://www.evolutionm.net/forums/sh...ery+Relocation
All my parts and stuff are listed in that thread.
I cut the tray down to eliminate the wasted space. I was going to fab something but the way the mounting holes are angles from the stock tray it would have been more trouble then it's worth.
#12
Originally posted by w2pac12345
Any more shots of the connections in the front. Not sure how you got those wires all the over there. Did you have to extend them??
Any more shots of the connections in the front. Not sure how you got those wires all the over there. Did you have to extend them??
Ground I shortened at the clamp that goes to the body. I just reterminated the end and grouped it with the grounding kit on the battery tray bolt at the tranny mount.
I can take more when I get a chance. Unfortunately, snow was not in my favor and right now I am waiting for a new RH lower control arms to get the car back together. I'll have to take some shots of that cause it bent the **** out of it. (curb).
![Crap](https://www.evolutionm.net/forums/images/smilies/crap.gif)