New BW EFR Turbo Thread
Mar 11, 2013 | 04:11 AM
#2417
Newbie
Joined: Oct 2009
Posts: 12
Likes: 0
From: Australia
Check this escort out... Awd with 8374! Freaking awesome! In car vids and outside. Insane
http://passionford.com/forum/5979579-post67.html
http://passionford.com/forum/5979579-post67.html
It had the nicer stainless exhaust housing, but I'm unsure if this was the latest updated version efr
Mar 11, 2013 | 07:47 AM
#2420
Newbie
Joined: Oct 2009
Posts: 12
Likes: 0
From: Australia
Sorry guys, my last post reads like that's my car, but it's not.
The owner's name is Romain, and has a workshop in Italy. http://www.oppligermotorsport.com/in...d=13&Itemid=47
The owner's name is Romain, and has a workshop in Italy. http://www.oppligermotorsport.com/in...d=13&Itemid=47
Mar 11, 2013 | 08:04 AM
#2421
Mar 11, 2013 | 12:26 PM
#2423
Mar 11, 2013 | 07:02 PM
#2425
Turbine wheel was made in the US of A and the smart sub contractors that they were used a DIFFERENT alloy of TiAL than what was spec'd and guess what happened? They broke, the production got sent to Japan and now all is Kosher.
That being said... I'd like to get an 8374. After I measured everything tonight, I'm 100% sure it'll fit on my current manifold setup. So... if someone is looking for a 1.05A/R T4 7670 to purchase let me know. I'll sell mine to fund getting the 8374.
I want 650whp at 9k
That being said... I'd like to get an 8374. After I measured everything tonight, I'm 100% sure it'll fit on my current manifold setup. So... if someone is looking for a 1.05A/R T4 7670 to purchase let me know. I'll sell mine to fund getting the 8374.
I want 650whp at 9k
Mar 12, 2013 | 05:03 AM
#2427
Evolving Member
Joined: Mar 2012
Posts: 167
Likes: 0
From: galicia
Turbine wheel was made in the US of A and the smart sub contractors that they were used a DIFFERENT alloy of TiAL than what was spec'd and guess what happened? They broke, the production got sent to Japan and now all is Kosher.
That being said... I'd like to get an 8374. After I measured everything tonight, I'm 100% sure it'll fit on my current manifold setup. So... if someone is looking for a 1.05A/R T4 7670 to purchase let me know. I'll sell mine to fund getting the 8374.
I want 650whp at 9k
That being said... I'd like to get an 8374. After I measured everything tonight, I'm 100% sure it'll fit on my current manifold setup. So... if someone is looking for a 1.05A/R T4 7670 to purchase let me know. I'll sell mine to fund getting the 8374.
I want 650whp at 9k
Mar 12, 2013 | 05:47 AM
#2428
Evolving Member
Joined: Aug 2011
Posts: 210
Likes: 0
From: Earth
Turbine wheel was made in the US of A and the smart sub contractors that they were used a DIFFERENT alloy of TiAL than what was spec'd and guess what happened? They broke, the production got sent to Japan and now all is Kosher.
That being said... I'd like to get an 8374. After I measured everything tonight, I'm 100% sure it'll fit on my current manifold setup. So... if someone is looking for a 1.05A/R T4 7670 to purchase let me know. I'll sell mine to fund getting the 8374.
I want 650whp at 9k
That being said... I'd like to get an 8374. After I measured everything tonight, I'm 100% sure it'll fit on my current manifold setup. So... if someone is looking for a 1.05A/R T4 7670 to purchase let me know. I'll sell mine to fund getting the 8374.
I want 650whp at 9k
R/T send me a PM with the price.
Thanks.
Mar 12, 2013 | 06:24 AM
#2429
Evolving Member
Joined: Aug 2011
Posts: 210
Likes: 0
From: Earth
Turbine wheel was made in the US of A and the smart sub contractors that they were used a DIFFERENT alloy of TiAL than what was spec'd and guess what happened? They broke, the production got sent to Japan and now all is Kosher.
That being said... I'd like to get an 8374. After I measured everything tonight, I'm 100% sure it'll fit on my current manifold setup. So... if someone is looking for a 1.05A/R T4 7670 to purchase let me know. I'll sell mine to fund getting the 8374.
I want 650whp at 9k
That being said... I'd like to get an 8374. After I measured everything tonight, I'm 100% sure it'll fit on my current manifold setup. So... if someone is looking for a 1.05A/R T4 7670 to purchase let me know. I'll sell mine to fund getting the 8374.
I want 650whp at 9k
Never mind... lol I was looking at the picture you took of your EFR serial number and then went to mine, and mine is the next one that came after yours! Your is older than mine! lol
R/T #APA306110011
mine #APA306110012
So, if your turbo is still alive, I'm happy. Mine hasn't seen more than 26psi which was on the dyno, and I don't think it will see more than that. I'm running 23psi at the track.
R/T
MINE
