any drawback to cams
#16
Originally posted by mprtklr
the 264's do not have a noticeanly lumpy idle, you cant even tell i have them installed.
the 264's do not have a noticeanly lumpy idle, you cant even tell i have them installed.
#17
Originally posted by RichJ
A few days ago, David Buschur posted: "The [264] cams definetely take away some of the low end hit the car has stock." Is that your experience as well?
A few days ago, David Buschur posted: "The [264] cams definetely take away some of the low end hit the car has stock." Is that your experience as well?
http://www.automotosports.com/cam_test.asp
#18
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: ..
Posts: 462
Likes: 0
Received 0 Likes
on
0 Posts
So no one has experienced any problems with the cams? Sounds good so far. I have the BR 3" turbo back, I/C pipe, and filter with MAF pipe. I will be dropping in the 264's and getting a custom dyno tune of the XEDE. I want to stay at around 21-20.5psi and 11.2 on the a/f ratio. I would like to have close to 400whp on 93 octane,or atleast be close. So with no major drawbacks I will be on my way with this setup.
Thanks
Thanks
#19
EvoM Guru
iTrader: (1)
Join Date: Dec 2002
Location: Boulder, Co.
Posts: 1,767
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RichJ
How is the low speed drivability and low end torque? Any loss of power down low? A few days ago, David Buschur posted: "The [264] cams definetely take away some of the low end hit the car has stock." Is that your experience as well?
How is the low speed drivability and low end torque? Any loss of power down low? A few days ago, David Buschur posted: "The [264] cams definetely take away some of the low end hit the car has stock." Is that your experience as well?
#20
Evolved Member
iTrader: (45)
Originally posted by alleggerita
Interesting in that AMS seems to have a differernt experience:
http://www.automotosports.com/cam_test.asp
Interesting in that AMS seems to have a differernt experience:
http://www.automotosports.com/cam_test.asp
Id run 272/272... or if you're on a budget just run the 272 exhaust, you should net about 26 HP from just the one.
#21
Evolving Member
iTrader: (7)
Join Date: Jul 2003
Location: Temecula, Ca.
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
the cams of 264/265 netted me about 25hp on a mustang dyno. and the idle is fine, my torque curve was fairly identical before and after cams. i need to find my sheet and scan it.
#22
In Timeout
Join Date: Dec 2003
Location: Kennesaw Ga
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Man, you need to put some more stuff in your sig.
Originally posted by mprtklr
the cams of 264/265 netted me about 25hp on a mustang dyno. and the idle is fine, my torque curve was fairly identical before and after cams. i need to find my sheet and scan it.
the cams of 264/265 netted me about 25hp on a mustang dyno. and the idle is fine, my torque curve was fairly identical before and after cams. i need to find my sheet and scan it.
#24
Evolving Member
Join Date: Feb 2003
Location: Denver CO
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
Yeah. If we install any of these combos. Will we pass emmisions? That is very important to know I think. If we don't pass what do you do? Change them back out?
#25
Evolved Member
iTrader: (4)
Join Date: Aug 2003
Location: MD
Posts: 1,189
Likes: 0
Received 0 Likes
on
0 Posts
Has anyone read this months Modified Mag , there is a good article in there about the cam and the tunning on the evo. Along with a bunch of different mods. They maxed out there hp at 363 hp on a 2 wheel dyno so basicly putting about 330-335 to the wheels.
#26
Evolving Member
iTrader: (7)
Join Date: Jul 2003
Location: Temecula, Ca.
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Secret Chimp
mprtklr, Will your car pass smog with that cam set up?
SC~
mprtklr, Will your car pass smog with that cam set up?
SC~
dont know, i guess i'll worry about that in 4 years. i dont get a CEL for a misplaced CAM timer or CPS so i dont think ill have a problem.
#28
Evolving Member
iTrader: (7)
Join Date: Jul 2003
Location: Temecula, Ca.
Posts: 473
Likes: 0
Received 0 Likes
on
0 Posts
no, guys, simple as this..listen closely...(screaming in your ears) WITH THE 264/264 combo, all qualities are identical to stock cams, you have to listen very closely to tell the difference. idle the same, sounds the same, drives the same, no loss of anything, the curve is the same as stock cams, just higher.
any 272 combo i cannot speak for as i dont have them. all i know is the 272 is lumpy.
any 272 combo i cannot speak for as i dont have them. all i know is the 272 is lumpy.