home brew Oil supply line for turbo?
#22
http://en.wikipedia.org/wiki/AN_thread
http://en.wikipedia.org/wiki/JIC_fitting
"JIC fittings are dimensionally identical to AN (Army-Navy) fittings, but are produced to less exacting tolerances and are generally less costly. 45-degree flare fittings are similar in appearance, but are not interchangeable."
quoted from wikipedia
http://en.wikipedia.org/wiki/JIC_fitting
"JIC fittings are dimensionally identical to AN (Army-Navy) fittings, but are produced to less exacting tolerances and are generally less costly. 45-degree flare fittings are similar in appearance, but are not interchangeable."
quoted from wikipedia
#24
Account Disabled
iTrader: (38)
I got the oil filter housing fitting from 42 draft designs and just got an NPT to -4an fitting from jegs...
http://store.42draftdesigns.com/Lanc...ptor_p_54.html
http://www.jegs.com/i/Earl%26%23039%...81604/10002/-1
http://store.42draftdesigns.com/Lanc...ptor_p_54.html
http://www.jegs.com/i/Earl%26%23039%...81604/10002/-1
#30
Evolved Member
iTrader: (1)
Join Date: Mar 2005
Location: Mesoamerica/ SF Bay Area
Posts: 7,905
Likes: 0
Received 5 Likes
on
5 Posts
I would think this line would work with our cars if its long enough.http://www.extremepsi.com/store/prod...cat=336&page=1
Last edited by sparky; Aug 27, 2011 at 02:42 PM.