thedru13

iTrader: (24)

Ok just installed injen uicp and injen intake. I hade stock uicp with HKS intake. I was having idle issues so swapped my pipe and I take thinking it would solve it due to MAf position. So it helped. My issue now is this. The fitment of the uicp and the BoV. I have an Evo IX I had one hell of a time getting te BoV to line up to be able to install. I can't get the bracket on the lower part of the hose to line up to scre down. The pipe has a bracket on it. I am not a huge fan o there product but the price was right. Any one have any tricks to get better fitment? I have a leak at the BOV cause it ls at sucks a weird angle. About to put my stock stuff back on. I am on stock battery as well.

escodotcarter

iTrader: (16)

does it look like this? Post up some pictures so its easier to see whats going on. I took this pic from here: https://www.evolutionm.net/forums/ev...tock-uicp.html

thedru13

iTrader: (24)

Yah looks similar but te BOv is cocked back a bit. Will snap some pics. On my phone right now. Site is blocked from work.

escodotcarter

iTrader: (16)

cocked back towards what? try twisting the uicp? Where is the leak?

thedru13

iTrader: (24)

Hose does not sit flush on the IC pipe. The part where the bov hose goes on is exposed on the side that faces the radiator. God I wish Evom used taptalk. I will get a pic up soon

escodotcarter

iTrader: (16)

i'll wait for the pics

thedru13

iTrader: (24)

Ran out and took these will get better shots later.





It's the back of the BOV pipe that doesn't sit flush. Not an easy picture to take. Plus motor was hot.

escodotcarter

iTrader: (16)

maybe you can stick some kind of rubber sealant where it doesnt sit flush>? btw I like the camo

thedru13

iTrader: (24)

I may mess with it more. My boost usually is around 25 now I am at 21. Would the uicp make the boost less? Thanks btw. Why I am trying to make
It work. Spent that money in powder coating them. Also see how the bracket doesn't line up?

escodotcarter

iTrader: (16)

isnt that uicp 2 pieces? can you loosen the coupler and turn the pipe in order to move the braket over?

thedru13

iTrader: (24)

I can get it flush but doesn't line up with any of the bolt holes.

escodotcarter

iTrader: (16)

idk, maybe something is bent somewhere. good luck though.

thedru13

iTrader: (24)

Thanks for the help. Appreciate it

thedru13

iTrader: (24)

Some more pics.. Trying to find a boost leak on it now. You can see the weird angle the BOV is pulling the coupler.