PTE 6766 vs FP3794 HTA
#1
PTE 6766 vs FP3794 HTA
Guys, anyone has owner any of these, any reviews so far.
Reviews so far for the PTE676cc is by STM and FP3794 is by AWD , both supporting their vendors, anyone else tested them ?
PTE6766 vs 6765 by STM
then now the FP3794
Diffrence in Compressor wheel sizes
PTE is 67mm Inducer , 87 Exducer , Turbine Inducer 74mm, Exducer 66mm
FP is 67.5mm Inducer , 94mm Exducer , Turbine Inducer 72mm Exducer 65mm
Both Links :
http://store.forcedperformance.net/m..._Code=Turbo-FP
http://www.streettunedmotorsports.co...6766_turbo.htm
PTE vs FP in highboost forums
Any others users running either one of them ?
Reviews so far for the PTE676cc is by STM and FP3794 is by AWD , both supporting their vendors, anyone else tested them ?
PTE6766 vs 6765 by STM
Precision's latest Turbo, the 6766 is finally here. STM has tested this turbo in the "Ricer" Evo VIII for the 2011 race season before we even knew what the turbo was to be called! We replaced our previous 6765 from 2010 and with this new turbo we would have expected a loss in spool, but quite the contrary, it spools faster with a significant gain in power. So far we have topped the charts out at 846 HP on our Mustang dyno with 1/4 mile trap speeds of 167 mph... and that's the number that matters!
The FP HTA™ GT3794R turbocharger is the next step beyond the FP HTA™ GT3586R in power production within the GT35R footprint. It combines the greater turbine flow found in the GT37 with the 90lb/min flow rating of the 94mm HTA™ compressor
PTE is 67mm Inducer , 87 Exducer , Turbine Inducer 74mm, Exducer 66mm
FP is 67.5mm Inducer , 94mm Exducer , Turbine Inducer 72mm Exducer 65mm
Both Links :
http://store.forcedperformance.net/m..._Code=Turbo-FP
http://www.streettunedmotorsports.co...6766_turbo.htm
PTE vs FP in highboost forums
Any others users running either one of them ?
#6
Evolving Member
846AWHP on a Mustang
vs.
854AWHP on a Dynojet
I'd pick 846AWHP on a Mustang any day. Plus the 6766 made more torque with better spoolup.