***DST built evo 8 RS***
#1
Newbie
Thread Starter
Join Date: Nov 2011
Location: Miami, Fl
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
***DST built evo 8 RS***
First off I want to thank Sean and Justin @ DST Motorsports for taking care of my car.
I opted to have the head build up to handle more power and boost. They took off the head sand blasted and made sure it was true and straight then following parts were installed:
-Tomei Springs
-Manley Retainers and locks
-New Mitsu Head gasket and valve seals
-HKS 272 Cams
I couldn't be any happier as they met and exceeded my expectations and I would recommend them if you have any shop needs. Here are some pictures of the progress:
Head came out looking new...
I opted to have the head build up to handle more power and boost. They took off the head sand blasted and made sure it was true and straight then following parts were installed:
-Tomei Springs
-Manley Retainers and locks
-New Mitsu Head gasket and valve seals
-HKS 272 Cams
I couldn't be any happier as they met and exceeded my expectations and I would recommend them if you have any shop needs. Here are some pictures of the progress:
Head came out looking new...
Last edited by Bpower; Jan 12, 2012 at 09:23 PM.
#5
Newbie
Thread Starter
Join Date: Nov 2011
Location: Miami, Fl
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
It put down 344 WHP on pump with Evo 9 turbo.
I am thinking of getting it tuned on e-85 to put down around 400 WHP then save up for some bottom end parts and go bigger turbo eventually to break into 500 WHP (that is the goal).
Last edited by Bpower; Jan 13, 2012 at 09:19 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Golden
Evo X How Tos / Installations
100
Jun 6, 2017 09:14 AM
04slowevo
Evo Show / Shine
15
Mar 26, 2010 07:32 AM