NEW PTE 6466 turbo pics.
#67
Hey bro, I recently installed a 6466 in my grand national
Just had a question for u,
After I shut off the engine the turbo continues to spin and makes a notisable noise. It spins for 30 seconds or so.
Wasn't sure if this is normal. Hearing the noise?
I would want to say its a bearing or scraping a wall but I don't think it would spin so easily if that were the case.
Just had a question for u,
After I shut off the engine the turbo continues to spin and makes a notisable noise. It spins for 30 seconds or so.
Wasn't sure if this is normal. Hearing the noise?
I would want to say its a bearing or scraping a wall but I don't think it would spin so easily if that were the case.
#69
Former Sponsor
iTrader: (133)
Join Date: Dec 2003
Location: Anywhere
Posts: 3,123
Likes: 0
Received 0 Likes
on
0 Posts
Hey bro, I recently installed a 6466 in my grand national
Just had a question for u,
After I shut off the engine the turbo continues to spin and makes a notisable noise. It spins for 30 seconds or so.
Wasn't sure if this is normal. Hearing the noise?
I would want to say its a bearing or scraping a wall but I don't think it would spin so easily if that were the case.
Just had a question for u,
After I shut off the engine the turbo continues to spin and makes a notisable noise. It spins for 30 seconds or so.
Wasn't sure if this is normal. Hearing the noise?
I would want to say its a bearing or scraping a wall but I don't think it would spin so easily if that were the case.
#70
Hey bro, I recently installed a 6466 in my grand national
Just had a question for u,
After I shut off the engine the turbo continues to spin and makes a notisable noise. It spins for 30 seconds or so.
Wasn't sure if this is normal. Hearing the noise?
I would want to say its a bearing or scraping a wall but I don't think it would spin so easily if that were the case.
Just had a question for u,
After I shut off the engine the turbo continues to spin and makes a notisable noise. It spins for 30 seconds or so.
Wasn't sure if this is normal. Hearing the noise?
I would want to say its a bearing or scraping a wall but I don't think it would spin so easily if that were the case.
#71
Hey bro, I recently installed a 6466 in my grand national
Just had a question for u,
After I shut off the engine the turbo continues to spin and makes a notisable noise. It spins for 30 seconds or so.
Wasn't sure if this is normal. Hearing the noise?
I would want to say its a bearing or scraping a wall but I don't think it would spin so easily if that were the case.
Just had a question for u,
After I shut off the engine the turbo continues to spin and makes a notisable noise. It spins for 30 seconds or so.
Wasn't sure if this is normal. Hearing the noise?
I would want to say its a bearing or scraping a wall but I don't think it would spin so easily if that were the case.
the car was tuned today and made over 800HP and over 600TRQ at 44psi on E85. sean wanted to go for 900 but i backed out and said what i have is fine. this turbo is nasty. with the turbo and 650 cams the difference from this to the HTA86 was impressive in a good way. this also is making over 100hp more on top end then the HTA did.
once the car go's 9s ill post up all the details. but for now this is it.
#73
Spent the weekend at FatFab. Kick *** shop ran by a group of sushi loving lunatics. Great prices and excellent fab work in centrally located Indianapolis. They will make your dreams come true!
Turbo is a PTE 6466, Fatfab manifold, custom 3" O2 housing with recirc, and a Tial MVR. Hellooo power! Makes the GT35R pulled off the car feel like childs play.
Pictures in process
http://lilevo.com/lilevo2/6466/
Few pictures of the completed setup.
http://wikked.com/lilevo/newtrubo/
Going to try and hop on a dynojet before the shootout then strap on Buschurs dyno when I get to Ohio.
Turbo is a PTE 6466, Fatfab manifold, custom 3" O2 housing with recirc, and a Tial MVR. Hellooo power! Makes the GT35R pulled off the car feel like childs play.
Pictures in process
http://lilevo.com/lilevo2/6466/
Few pictures of the completed setup.
http://wikked.com/lilevo/newtrubo/
Going to try and hop on a dynojet before the shootout then strap on Buschurs dyno when I get to Ohio.
#75
Newbie
iTrader: (2)
Join Date: Dec 2007
Location: puerto rico
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
yes your fine. spin that turbo man. and spin it hard. i am in love with mine.
the car was tuned today and made over 800HP and over 600TRQ at 44psi on E85. sean wanted to go for 900 but i backed out and said what i have is fine. this turbo is nasty. with the turbo and 650 cams the difference from this to the HTA86 was impressive in a good way. this also is making over 100hp more on top end then the HTA did.
once the car go's 9s ill post up all the details. but for now this is it.
the car was tuned today and made over 800HP and over 600TRQ at 44psi on E85. sean wanted to go for 900 but i backed out and said what i have is fine. this turbo is nasty. with the turbo and 650 cams the difference from this to the HTA86 was impressive in a good way. this also is making over 100hp more on top end then the HTA did.
once the car go's 9s ill post up all the details. but for now this is it.
![Beer](https://www.evolutionm.net/forums/images/smilies/beer05.gif)
![Beer](https://www.evolutionm.net/forums/images/smilies/beer05.gif)