slowautoxr

iTrader: (6)

I bought a used HKS Carbon-Ti catback exhaust. The seller didn't have any of the mounting hardware. I need to figure out a way to hang the carbon muffler. I can't find direct contact info for HKS and the sellers of they systems can't get the parts.

I can fabricate the two mounts that attach to the body. What I can't figure out is how to attach the muffler to the rear most hanger. Obviously I can't weld a hanger to the body of it so I was thinking I could get a big 'ol clamp of sorts. But I'm having trouble with that also. Diesel trucks have some nice size hangers/mounts but they don't come in the diameter that I need - which is about 6.8"

Any thoughts or anybody know the direct contact info for HKS?

thepoint4life23

iTrader: (3)

Take it to a Muffler shop to weld in hangers for you

slowautoxr

iTrader: (6)

The can is wrapped in carbon fiber so there's nothing to weld to. This pic shows the muffler and the clamp that normally goes with it:

mrowka

iTrader: (6)

There are exhaust hangers that look sort of like an overgrown band clamp with wings. These are widely available at any chain auto parts store.

809JDM

iTrader: (33)

I have the larger mounting bracket that bolts to the car if your interested

mikakatk2

iTrader: (6)

you have a pic of the piece your talking bout? i might be interested.

slowautoxr

iTrader: (6)

I found something I could use. Fastenal p/n 0427945. I can install a flange to the bolts and weld whatever I need to that. Each clamp was less that $10

bonsuz01

iTrader: (3)

I got exactly the same Muffler I could take pic how mine mounted. But it would be this afternoon.

slowautoxr

iTrader: (6)

Do you have the HKS hanger or something else?

bonsuz01

iTrader: (3)

Yes it is and I welded the hanger on the clamp.

slowautoxr

iTrader: (6)

Here's what I ended up with:

xXANCHORMONXx

iTrader: (15)

looks better than what it would have came with, nice job

bonsuz01

iTrader: (3)

Looks good.