AMS or ETS FMIC?
#31
Evolved Member
iTrader: (12)
Exactly. If AMS spent a little time on our forum their products would still be considered best of the very best. Either way OP, you can't go wrong. I just shelled out the extra cash on the AMS because I knew at the time it was the best of the very best and personally I think it looks a lot better. I also run an AMS fuel rail and will have their intake manifold very soon, I like to keep most of my parts from them but again wouldn't hesitate on ETS. I can't waaaait to get the ETS short route uicp.
#32
I can't speak much about AMS as I only have one of their parts (balance shift delete) and I also agree with RichieVegasIX and PatricksEvilEvo as far as needing a better presence here. I highly highly recommend ETS though. Michael and the ETS crew has been nothing but awesome. I have have an ETS 4 incher and one of their full twin scroll T4 turbo kits on my car along with their upper and lower pipping and the fit and finish is amazing. They answered all my questions very quickly, even the long drawn out ones before I purchased anything from them. I do only have one complaint... They are on the west coast making ship times longer to me on the east coast ha!
#33
Evolving Member
iTrader: (4)
I can't speak much about AMS as I only have one of their parts (balance shift delete) and I also agree with RichieVegasIX and PatricksEvilEvo as far as needing a better presence here. I highly highly recommend ETS though. Michael and the ETS crew has been nothing but awesome. I have have an ETS 4 incher and one of their full twin scroll T4 turbo kits on my car along with their upper and lower pipping and the fit and finish is amazing. They answered all my questions very quickly, even the long drawn out ones before I purchased anything from them. I do only have one complaint... They are on the west coast making ship times longer to me on the east coast ha!
#36
Former Sponsor
iTrader: (11)
It is true that we don't have the same presence here that we use to but we are still making and selling many Evo 8/9/X products daily. We are also here to serve the community and answer any questions that you may have.
#37
Im not sure what im going to do, Im in portland today and am going to cruise up to ets in an hour to check out their shop. my injen **** has not shipped yet but we will see. I ultimately plan to get as much **** from ets over the next year I can. hhmmmm maybe ill take a loss on the injen if someone else wants it.
#38
Evolved Member
iTrader: (34)
Both companies are Great either one you pick would work, Personally I've used ETS products on both my car's. They've been really helpful & backed up every single thing they sell!
& consider what brand intake/uicp/licp etc your going to go with its best to make sure you find a complete setup you like from one company
& consider what brand intake/uicp/licp etc your going to go with its best to make sure you find a complete setup you like from one company
#40
Im not sure what im going to do, Im in portland today and am going to cruise up to ets in an hour to check out their shop. my injen **** has not shipped yet but we will see. I ultimately plan to get as much **** from ets over the next year I can. hhmmmm maybe ill take a loss on the injen if someone else wants it.
#42
the two gtrs were sweet and the supra on the lift looked like it was ready for something illegal lol.
Michael: thanks to whoever gave me the walk around today, I was in town and wanted to see the shop, it was awesome you guys come highly recommended from Dustin at nip n tuk in utah, and I will be recommending everyone I can.
#43
Former Sponsor
iTrader: (91)
Ha yea... no just a cruise by it was about 300 mile journey over there. was hoping for more of a show room buuuuuuuuttttt I was completely impressed with the walk around I got through the shop. The quality I saw was amazing. PROPS TO ETS
the two gtrs were sweet and the supra on the lift looked like it was ready for something illegal lol.
Michael: thanks to whoever gave me the walk around today, I was in town and wanted to see the shop, it was awesome you guys come highly recommended from Dustin at nip n tuk in utah, and I will be recommending everyone I can.
the two gtrs were sweet and the supra on the lift looked like it was ready for something illegal lol.
Michael: thanks to whoever gave me the walk around today, I was in town and wanted to see the shop, it was awesome you guys come highly recommended from Dustin at nip n tuk in utah, and I will be recommending everyone I can.
Hahaha.. Thanks man. That was Robert. He is one of our new sales guys. The gun metal GT-R has a kit on it capable of putting down over 1350whp and a 4.1L stroker. It's ready to have fun as well. The Supra did put down 1000whp through a 4L80E automatic transmission. We are prepping the silver one now for an even bigger build. The Evo's are at the other shop right now.. we just don't have the room here We are full manufacturing as you can see haha. 15 guys in the shop getting busy.
Michael
#44
Hahaha.. Thanks man. That was Robert. He is one of our new sales guys. The gun metal GT-R has a kit on it capable of putting down over 1350whp and a 4.1L stroker. It's ready to have fun as well. The Supra did put down 1000whp through a 4L80E automatic transmission. We are prepping the silver one now for an even bigger build. The Evo's are at the other shop right now.. we just don't have the room here We are full manufacturing as you can see haha. 15 guys in the shop getting busy.
Michael
Michael