ILoveAWD

iTrader: (17)

I have a quick question, it would be awesome if someone can help me out. Ok i have a borg warner turbo t4 Twin scroll S362 with a custom built inlet housing and exhaust housing. my question is how do you install the vacuum lines? it is not like the precision where there is a nipple on the turbo where you connect the vacuum lines from the waste gate to the turbo. is it possible to just use one of the nipples off of the intake manifold? i deleted my EGR valve and i have a few extra nipples there.

cfdfireman1

iTrader: (11)

just add a fitting to the turbo outlet. tap it, weld it whatever you have to do. using manifold pressure isn't the same.

ILoveAWD

iTrader: (17)

good idea i really didnt think of that idk y

ILoveAWD

iTrader: (17)

thanks alot man

ILoveAWD

iTrader: (17)

Thanks a lot for the info bro i went ahead and tapped the turbo and installed a nipple and it turned out perfect. i installed it right where i assume it would be located. thanks for the info again.
BEFORE



AFTER



DURING