Where is the relay for the fuel pump on the EVO??
#2
Evolved Member
According to the manual, it is on the firewall, passengers side, just to the right of the ABS unit.
It's black and about 1 1/4" square. Mine says denso on it.
Right below is a heavily heatsinked piece called the fuel pump resistor.
If you can get your hands on a manual, I am looking at section 13A - Fuel Pump System
It's black and about 1 1/4" square. Mine says denso on it.
Right below is a heavily heatsinked piece called the fuel pump resistor.
If you can get your hands on a manual, I am looking at section 13A - Fuel Pump System
#3
Evolved Member
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Tri-State
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mikesevo8
According to the manual, it is on the firewall, passengers side, just to the right of the ABS unit.
It's black and about 1 1/4" square. Mine says denso on it.
Right below is a heavily heatsinked piece called the fuel pump resistor.
If you can get your hands on a manual, I am looking at section 13A - Fuel Pump System
According to the manual, it is on the firewall, passengers side, just to the right of the ABS unit.
It's black and about 1 1/4" square. Mine says denso on it.
Right below is a heavily heatsinked piece called the fuel pump resistor.
If you can get your hands on a manual, I am looking at section 13A - Fuel Pump System
#4
Evolved Member
I'll give it a shot.
I have the manual in pdf.
I had to cut and paster the page, then print it and scan it in, so the quality may suck.
Let me know if this doesn't work...oooh, I gues it does...
I have the manual in pdf.
I had to cut and paster the page, then print it and scan it in, so the quality may suck.
Let me know if this doesn't work...oooh, I gues it does...
#5
Evolved Member
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Tri-State
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mikesevo8
I'll give it a shot.
I have the manual in pdf.
I had to cut and paster the page, then print it and scan it in, so the quality may suck.
Let me know if this doesn't work...oooh, I gues it does...
I'll give it a shot.
I have the manual in pdf.
I had to cut and paster the page, then print it and scan it in, so the quality may suck.
Let me know if this doesn't work...oooh, I gues it does...
YOur the man. Is this mike or mike's dad?
#6
Evolved Member
Originally posted by Eric Lyublinsky
THANK YOU MIKE.
YOur the man. Is this mike or mike's dad?
THANK YOU MIKE.
YOur the man. Is this mike or mike's dad?
Mike is getting ready to order a pump, your bad pump post was eye opening.
#7
Evolved Member
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Tri-State
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mikesevo8
It's dad. You have always posted good info, so glad to be able to pay back.
Mike is getting ready to order a pump, your bad pump post was eye opening.
It's dad. You have always posted good info, so glad to be able to pay back.
Mike is getting ready to order a pump, your bad pump post was eye opening.
Get the PE pump. It will save you all this trouble I'm going throw.
You also have bin very helpfull with technical information this is why I love Internet car fourms. We might not always agree but we are always open to learn from each other.
Eric
Trending Topics
#8
Evolved Member
Originally posted by Eric Lyublinsky
Mike's Dad, (what's your name)
Get the PE pump. It will save you all this trouble I'm going throw.
You also have bin very helpfull with technical information this is why I love Internet car fourms. We might not always agree but we are always open to learn from each other.
Eric
Mike's Dad, (what's your name)
Get the PE pump. It will save you all this trouble I'm going throw.
You also have bin very helpfull with technical information this is why I love Internet car fourms. We might not always agree but we are always open to learn from each other.
Eric
Too bad Mike's car is apart now or we would be down to Applebees on Sunday.
The HKS CB exhaust is on; still waiting for DP ( backorder )
We are installing HKS EVC and AEM intake. Cams are still in the box ( HKS 264s I/E ).
Waiting until I get or make a tension tool.
Now it appears we should also do the pump and injectors, to ward off any lean conditions.
Then I saw the thread for the head studs, and that sounds like cheap insurance too.
Man, this modding sure adds up quick. It's addictive.
BTW, for those lurking, Mike's dads name is Corky. OK, so it's a nickname; blame my folks.
I love driving Mikes car. Used to have some american muscle back in the day.
For reference, I will post a pic of me. As you will see, I am one of the few that will make Big Al look like average Al.
Mike has titled this pic "The fat and the Furious"
#10
Evolved Member
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Tri-State
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mikesevo8
Thanks, I try. Sometimes I miss ....
Too bad Mike's car is apart now or we would be down to Applebees on Sunday.
The HKS CB exhaust is on; still waiting for DP ( backorder )
We are installing HKS EVC and AEM intake. Cams are still in the box ( HKS 264s I/E ).
Waiting until I get or make a tension tool.
Now it appears we should also do the pump and injectors, to ward off any lean conditions.
Then I saw the thread for the head studs, and that sounds like cheap insurance too.
Man, this modding sure adds up quick. It's addictive.
BTW, for those lurking, Mike's dads name is Corky. OK, so it's a nickname; blame my folks.
I love driving Mikes car. Used to have some american muscle back in the day.
For reference, I will post a pic of me. As you will see, I am one of the few that will make Big Al look like average Al.
Mike has titled this pic "The fat and the Furious"
Thanks, I try. Sometimes I miss ....
Too bad Mike's car is apart now or we would be down to Applebees on Sunday.
The HKS CB exhaust is on; still waiting for DP ( backorder )
We are installing HKS EVC and AEM intake. Cams are still in the box ( HKS 264s I/E ).
Waiting until I get or make a tension tool.
Now it appears we should also do the pump and injectors, to ward off any lean conditions.
Then I saw the thread for the head studs, and that sounds like cheap insurance too.
Man, this modding sure adds up quick. It's addictive.
BTW, for those lurking, Mike's dads name is Corky. OK, so it's a nickname; blame my folks.
I love driving Mikes car. Used to have some american muscle back in the day.
For reference, I will post a pic of me. As you will see, I am one of the few that will make Big Al look like average Al.
Mike has titled this pic "The fat and the Furious"
Oh don't worry about being a little big. Just don't ware a speedo.
#13
Evolved Member
Originally posted by Eric Lyublinsky
Looks like you got your hands full. I do have the tool if you need to borw it. I will be at the meet on Sunday. PM me if you going down I will bring it with me.
Oh don't worry about being a little big. Just don't ware a speedo.
Looks like you got your hands full. I do have the tool if you need to borw it. I will be at the meet on Sunday. PM me if you going down I will bring it with me.
Oh don't worry about being a little big. Just don't ware a speedo.
I think I will make one up like BadBoyBeltran did, with a piece of threaded rod and some nuts ...
Speedo .. I'd look like a pear with a rubberband around it ...
Here's a pic of Mike, in case we meet up sometime.
We are shooting to be ready for the DSM/Evo meet at E-town.
I know straight line isn't your thing, but you might want to stop by just to see all the cars...
#14
Evolved Member
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Tri-State
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by MP5
Are you checking the integrity of the electrical source? Are you suspecting a bum relay or just ruling it out? You dont have manuals?
Are you checking the integrity of the electrical source? Are you suspecting a bum relay or just ruling it out? You dont have manuals?
#15
Evolved Member
Thread Starter
iTrader: (5)
Join Date: Mar 2003
Location: Tri-State
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by mikesevo8
I don't think we'll make it, but thanks for the offer.
I think I will make one up like BadBoyBeltran did, with a piece of threaded rod and some nuts ...
Speedo .. I'd look like a pear with a rubberband around it ...
Here's a pic of Mike, in case we meet up sometime.
We are shooting to be ready for the DSM/Evo meet at E-town.
I know straight line isn't your thing, but you might want to stop by just to see all the cars...
I don't think we'll make it, but thanks for the offer.
I think I will make one up like BadBoyBeltran did, with a piece of threaded rod and some nuts ...
Speedo .. I'd look like a pear with a rubberband around it ...
Here's a pic of Mike, in case we meet up sometime.
We are shooting to be ready for the DSM/Evo meet at E-town.
I know straight line isn't your thing, but you might want to stop by just to see all the cars...
Again thanks alot hopefully we will run into each other soon.
Eric