BOOST_ADDICT

iTrader: (2)

So I just installed fp black over the weekend along with many other parts and I'm now using the tial BOV, now I've read that The line off the tial should go directly to the intake mani without any other lines T'ing Off of it but My old set up I had the MBC T'ing off that line and I know that you can run it off the turbo nipple to the WG but my issue is I've also read that when using that route boost is inconsistant, so I just wanted some feedback from anyone else running similar setup and what route they took and how it's working out thanks.

evo8426

iTrader: (27)

One line goes to the wastegate and the other to the j-pipe at the turbo

BOOST_ADDICT

iTrader: (2)

ya i get how its routed my question was more so geared toward how well and accurate boost will be if i route it that way cause just about every Evo around me has theirs routed the opposite way.

llDemonll

iTrader: (21)

This is how mine is routed and I think the common way to do it

BOOST_ADDICT

iTrader: (2)

And no issues? or inconsistent boost reading i guess i just did too much searching and kept reading some people boosting above 22 psi have very inconsistent boost and a slightly slower spool but that last part im not worried about.