O2 housing 3 inch outlet?
#1
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Location: Near a Beach one of these days
Posts: 154
Received 0 Likes
on
0 Posts
O2 housing 3 inch outlet?
I'm in need of an O2 housing with a 3 inch outlet to match up with my 3 inch downpipe. Can't seem to find the right answer on google or evolutionm.
The only shop I can get any detailed info is from cbrd. They have an O2 housing with downpipe for $900+tax+shipping+waiting a long time for one.
http://cbrd.mybigcommerce.com/cbrd-b...ownpipe-combo/
I don't need to buy a new one, just need the O2 housing with a 3 inch outlet.
A few out there don't have specs I'm looking for....Invidia, Megan, Titek.
I've seen Invidia measurements and it's not that close to 3 inches in the outlet.
And no, I don't want O2 dump! Too noisy for me. I have an 02 Dump already. Trying to keep everything quiet as a kitty for the kids and wife.
The only shop I can get any detailed info is from cbrd. They have an O2 housing with downpipe for $900+tax+shipping+waiting a long time for one.
http://cbrd.mybigcommerce.com/cbrd-b...ownpipe-combo/
I don't need to buy a new one, just need the O2 housing with a 3 inch outlet.
A few out there don't have specs I'm looking for....Invidia, Megan, Titek.
I've seen Invidia measurements and it's not that close to 3 inches in the outlet.
And no, I don't want O2 dump! Too noisy for me. I have an 02 Dump already. Trying to keep everything quiet as a kitty for the kids and wife.
#3
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Location: Near a Beach one of these days
Posts: 154
Received 0 Likes
on
0 Posts
I'm currently running stock IX turbo. I'll upgrade to either an FP Green or an FP Red. I'm buying everything in pieces. The O2 and the exhaust are the next pieces to the puzzle before I do a tune.
Coming from Honda world and figuring the O2 pipe is restrictive. I have an AMS 3 inch downpipe. Wanted to make sure it mates up 3 inch O2 outlet to 3 inch downpipe inlet. I'm a bit **** about details like that.
#4
Evolved Member
iTrader: (4)
I'm currently running stock IX turbo. I'll upgrade to either an FP Green or an FP Red. I'm buying everything in pieces. The O2 and the exhaust are the next pieces to the puzzle before I do a tune.
Coming from Honda world and figuring the O2 pipe is restrictive. I have an AMS 3 inch downpipe. Wanted to make sure it mates up 3 inch O2 outlet to 3 inch downpipe inlet. I'm a bit **** about details like that.
Coming from Honda world and figuring the O2 pipe is restrictive. I have an AMS 3 inch downpipe. Wanted to make sure it mates up 3 inch O2 outlet to 3 inch downpipe inlet. I'm a bit **** about details like that.
#7
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Location: Near a Beach one of these days
Posts: 154
Received 0 Likes
on
0 Posts
I'll be doing either a green or red. EVO is currently stock right now. I'm just buying pieces this month...the O2 is one of them. Could I get the flanges and get someone locally to build me one with a 3 inch outlet?
Trending Topics
#9
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Location: Near a Beach one of these days
Posts: 154
Received 0 Likes
on
0 Posts
Yep CBRD is also V-band but cost way too much as well.
I had a feeling it Toxicfab that made that for you. Was about to post it on facebook and ask him. Dang, would like one built to fit stock somehow.
#11
Evolving Member
Thread Starter
iTrader: (1)
Join Date: Dec 2011
Location: Near a Beach one of these days
Posts: 154
Received 0 Likes
on
0 Posts
Not sure how long it takes for CBRD...they may have them in stock and ready to ship. I might as well sell my O2 dump and AMS DP and pay more to get the VBand O2 kit.
#15
Evolved Member
iTrader: (8)
Join Date: Feb 2006
Location: NJ
Posts: 539
Likes: 0
Received 0 Likes
on
0 Posts
I did a lot of 02 housing research before narrowing it down to CBRD or Invidia. I ended up with the Invidia, mainly due to the direct fit into my current DP and price. The Invidia is cast with bigger opening into the DP than the generic 02 housings (Megan) and seems to have good flow.
I also looked into many custom tig-welded housings and didn't feel that they do a good job when it comes to flow, especially the 90° turn. While I don't have back to back dynos or evidence of my theory, I drew a quick examples below explaining my opinion.
Welded 02 housing flow
Cast 02 housing flow
Invidia
I also looked into many custom tig-welded housings and didn't feel that they do a good job when it comes to flow, especially the 90° turn. While I don't have back to back dynos or evidence of my theory, I drew a quick examples below explaining my opinion.
Welded 02 housing flow
Cast 02 housing flow
Invidia