Boost.... Boost.... Boost.......
#1
Boost.... Boost.... Boost.......
Hey guys, i need some help with my boost.... right now what i have on my evo, is an exhuast+Dp+an Intake& a boost controller. i am pushing a bit over 1.3 bar right now, but i just wanted to know if its still safe to raise my boost a bit more!! i'd greatly appreciate ur help guyz.
#2
Evolving Member
Join Date: Sep 2003
Location: Cartersville, GA
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
You can go a little over 1.3 bar, 1.4 or 1.45 is a good place to stop though. 1.4 = 20.3 psi and 1.45 = 21.025 psi.
On pump gas I think 20psi should be where ya stop, without a little tuning anyways.
On pump gas I think 20psi should be where ya stop, without a little tuning anyways.
#4
Evolved Member
iTrader: (5)
Join Date: Dec 2003
Location: Work - New York, Alaska, Mexico or the Caribbean. -Home - Tx Hill Country
Posts: 1,858
Likes: 0
Received 0 Likes
on
0 Posts
You might look at a reflash from one of the vendors on the sight. They are not much more money and they allow more boost because of better fuel and timing management.
Thread
Thread Starter
Forum
Replies
Last Post