New build . No compression #2-4 cylinder
#17
Newbie
Thread Starter
#18
Newbie
Thread Starter
#20
Evolved Member
Go drive the car and do alot of engine braking. Decel from 4 k to a stop.
Could be rings are not seated.
It could also be improper ring end gaps or improper end gap position.
Or damaged ring/s from install.
Could be rings are not seated.
It could also be improper ring end gaps or improper end gap position.
Or damaged ring/s from install.
#21
Evolved Member
You might be over thinking it sir. Forget the compression and leak down teat results right now. Its a brand new engine that needs break in.
Also did by chance you use full synthetic oil?
Also did by chance you use full synthetic oil?
#22
EvoM Guru
iTrader: (1)
Brand new engines don't leak through the valves. Valves are lapped into the seat with lapping compound, they should be perfectly sealed when new.
Last edited by letsgetthisdone; Oct 18, 2016 at 06:33 AM.
#24
Evolved Member
And no matter how great a reputation the machine shop has, something you should always do before installing a head is check for leaking valves.
Thread
Thread Starter
Forum
Replies
Last Post
dambikeracer
Evo Engine / Turbo / Drivetrain
57
Mar 14, 2010 07:43 PM
nothere
Evo Engine / Turbo / Drivetrain
2
Aug 10, 2008 06:53 AM
Boston'sEvO-->8
Evo Engine / Turbo / Drivetrain
11
Sep 17, 2006 11:39 AM