C0dyix

i put in a forge rs dv on my evo 9 today with the heavy spring it comes with. Until i ran out of clicks on it it wouldnt hold my 25lbs of boost. Now if i take a turn at say 10lbs of boost it starts to dump it. Even at WOT at 25lbs i can hear it trying to sneak its way through the dv and then itll just dump it. Is there something im missing or should i just return it?

Bhsj13

oem evo 9 dv will be fine for 25 psi. mine is crushed and does well for 26psi.

C0dyix

mine was acting up a bit and causing a boost leak so i fogured its time to move on

Bhsj13

maybe try a different one and see what happens?

C0dyix

i have another forge dv that a friend gave me. The older non rs style and the things shot. I cant even make 15lbs. Im just hoping someone on here has some input as to whats going on

4G63_EVO

iTrader: (4)

hmm not sure, I just bought a turbosmart Kompact plumbback. Very cool little piece, I do wanna do a boost leak test and see if it holds cause im running upto 28psi. But so far so good, thing released faster than ive ever seen

C0dyix

mine sputters when i shift like the stutututu because the spring tensions way up but thats because it wont hold of i turn it down

4G63_EVO

iTrader: (4)

you might have a different one, mine isnt adjustable, just springs are interchangable. What boost doesnt it hold? I need to test mine first before I get retuned but max I run is 28. Im using the green spring it comes with and it doesnt stutter as of now

C0dyix

i have a forge type rs recirc and a fmevo15 forge recirc. The type rs will dump boost if you hold it at 10-20lbs too long idk why

C0dyix

Bump. When i pass someone on the highway in 5th and make approximately 5lbs of boost itll open up and forge isnt providing any sort of help

RightSaid fred

If it's leaking, it's broken.

C0dyix

I called forge and they swear its operating how it should be but if im driving it just pisses out boost

Bhsj13

LOL just get a new one. not forge.