Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

stalling issues after walbro fuel pump install

Thread Tools
 
Search this Thread
 
Old May 19, 2004 | 11:29 AM
  #16  
Secret Chimp's Avatar
Evolved Member
iTrader: (2)
 
Joined: Oct 2002
Posts: 2,367
Likes: 0
From: Between the Blue and the Sand
Originally Posted by Quickshift
As far as reseting the ecu it only take a couple minutes. Just pump your brakes like Kiss said . I have reset mine in about 1 min a couple times. The way you can tell your ecu is reset, is it will start to idle at about 1600 rpm for a bit while the ecu adjusts fuel and timing. But from the symtoms you said it almost sounds identical to my freinds problem.
To further refine this, it only takes a few secs to reset your ecu after you remove a battery cable. You do not have to hit your brake pedal to get it to reset either. Just undo the battery cable...hold it in your hand....count to 10.....then bolt down the cable. Your ecu is now reset.

SC~
Old May 19, 2004 | 11:43 AM
  #17  
Quickshift's Avatar
Evolved Member
iTrader: (4)
 
Joined: Aug 2003
Posts: 1,189
Likes: 0
From: MD
Ive had mine not reset from doing that. I disco the battery on mine for about 20 sec hooked it back up and wasnt reset . So just FYI sometimes there will be some left over juice somewhere.
Old May 19, 2004 | 02:43 PM
  #18  
arpad's Avatar
Thread Starter
Evolving Member
iTrader: (26)
 
Joined: Jan 2003
Posts: 261
Likes: 0
From: Pittsburgh
Should I reuse the old fuel filter or use the one included in the Walbro kit?
Old May 19, 2004 | 03:24 PM
  #19  
Quickshift's Avatar
Evolved Member
iTrader: (4)
 
Joined: Aug 2003
Posts: 1,189
Likes: 0
From: MD
I reused mine but if the kit comes with a new one might as well put it on.
Old May 23, 2004 | 01:46 AM
  #20  
arpad's Avatar
Thread Starter
Evolving Member
iTrader: (26)
 
Joined: Jan 2003
Posts: 261
Likes: 0
From: Pittsburgh
Thanks again for the suggestions; resetting the ECU didn't help, and I pulled out the pump and double-checked everything, but it all seemed to be in order. I contacted the company I bought it from (lancershop.com) and they were really cool about it, they're sending out a new one. I'll update with results after I install it...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
shane_evo7
Evo Engine / Turbo / Drivetrain
2
Mar 7, 2019 06:49 PM
STIU2SLO
Evo General
2
Feb 14, 2017 03:21 AM
khay silk
Evo X General
4
Dec 6, 2015 12:21 AM
89turbosupra
Evo Engine / Turbo / Drivetrain
9
Oct 17, 2015 04:57 PM
5LEEPERISAH23I
Evo General
9
Dec 30, 2011 06:14 PM



Quick Reply: stalling issues after walbro fuel pump install



All times are GMT -7. The time now is 07:52 PM.