Injen technology EVO 8 performance parts
Jun 15, 2004, 12:30 PM
#1
Newbie
Thread Starter
Join Date: May 2004
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Injen technology EVO 8 performance parts
Hello,
My name is Raymond Yuson and i'm a sales/tech support rep here at Injen Technology. I just want to inform you all about our newly released parts for your Evo 8. The intake with hard IC piping is available and the other parts are close behind. Please enjoy these pictures and feel free to ask questions.
*pictures of FMIC and Exhaust will be up very soon...
Intake:
This is the top IC piping that comes with the intake:
Downpipe on Car:
My name is Raymond Yuson and i'm a sales/tech support rep here at Injen Technology. I just want to inform you all about our newly released parts for your Evo 8. The intake with hard IC piping is available and the other parts are close behind. Please enjoy these pictures and feel free to ask questions.
*pictures of FMIC and Exhaust will be up very soon...
Intake:
This is the top IC piping that comes with the intake:
Downpipe on Car:
Last edited by Ray@INJEN; Jun 16, 2004 at 11:21 AM.
Jun 15, 2004, 04:24 PM
#5
Newbie
Thread Starter
Join Date: May 2004
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by YoungBlood45
How much for the top ic piping and intake
Trending Topics
Jun 15, 2004, 06:56 PM
#8
Registered User
iTrader: (3)
Join Date: Jan 2004
Location: Penn State University
Posts: 1,143
Likes: 0
Received 0 Likes
on
0 Posts
Not bad, especially because I have preconcieved opinions about InJen (Honda Civic). But, the Evo market is VERY tough, typically Dyno numbers and 1/4 times are more important than pictures.
Jun 15, 2004, 07:42 PM
#10
Newbie
iTrader: (1)
Join Date: May 2004
Location: Virginia
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
I already have my Injen intake and upper piping installed in my Evo and I love it. This is the first mod since I bought the car two month ago.
What Amaze me the most is the fitment. Every pipe line up perfectly against each other which took alot of R&D. Good job injen!
What Amaze me the most is the fitment. Every pipe line up perfectly against each other which took alot of R&D. Good job injen!
Jun 16, 2004, 10:17 AM
#15
Newbie
Thread Starter
Join Date: May 2004
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Hey everyone, the pics work here on my side...so i think photobucket was just messing up for a little bit..
-The intake is in the process of being CARB exempt
-The pipe diameter for the EVO intake kit is 3 inch to 4 inch in the middle, then tapers off into 3.25 inch where it goes into the filter.
-This kit contains the upper hard pipe and also hard piping from the throttle body to intercooler.
-The intake is in the process of being CARB exempt
-The pipe diameter for the EVO intake kit is 3 inch to 4 inch in the middle, then tapers off into 3.25 inch where it goes into the filter.
-This kit contains the upper hard pipe and also hard piping from the throttle body to intercooler.
Last edited by Ray@INJEN; Jun 16, 2004 at 11:54 AM.