Innovate LM-1
#16
Ok here is the deal. I do not know how often this happens but the RPM module that we recevied was not wired correctly. We hooked everything up and were watching a laptop while we revved up the car. On the screen the RPM's did not change, but the input 4 voltage would go up and down based on the throttle input. So problem solved, Innovate is sending us a new RPM module which should fix the problem.
#17
Sorry to bring this back from the dead, but which wire do I tap in the EVO harness to pick up the boost signal with the innovate?
I can pick up the rpm signal with the RPM converter just fine, it is the boost signal that I want.
I can pick up the rpm signal with the RPM converter just fine, it is the boost signal that I want.
#18
i dont think you can. unless theres a wire for the map sensor, and it actually has a voltage readout for the conversion... but i wouldnt trust what the stock map is saying. if you have a electrinic boost controller, or electronic (not mechanical) boost gauge you could tap one of those wires... again, youd need to know the voltage info of that wire to do your conversion for the lm1 to data log or just see the input correctly.
Thread
Thread Starter
Forum
Replies
Last Post
TURBODAWG
For Sale/WTB - Engine / Drivetrain / Power
18
Oct 5, 2007 01:48 PM
gudmundur
General Engine Management / Tuning Forum
3
Feb 14, 2007 04:58 PM