Evo FMIC questions...
Oct 25, 2002 | 10:11 PM
#16
Awesome I/C I was trying to get a look at the I/C on my VII a while ago. Size it up by looking through the bumper does not do it justice.
But your picture sure shows it in its full glory. No wonder the stock one is so hard to beat for the aftermarket manufacturers.
The Evo VII wheel is 17X8JJ, ET+38, PCD=5-114.3, hub dia 60.7 and weighs 10.2kg
Erik
But your picture sure shows it in its full glory. No wonder the stock one is so hard to beat for the aftermarket manufacturers.
The Evo VII wheel is 17X8JJ, ET+38, PCD=5-114.3, hub dia 60.7 and weighs 10.2kg
Erik
Oct 26, 2002 | 03:45 AM
#18
Guest
Posts: n/a
Originally posted by CooperAWD
How much should an evo7 fmic cost? (to compare)
How much should an evo7 fmic cost? (to compare)
Oct 26, 2002 | 04:09 AM
#19
Guest
Posts: n/a
Originally posted by CooperAWD
I'm also getting the FMIC... not sure how well it will fit though... and since this will all be on a DSM e/t/l instead of an evo, i'll be looking at custom piping (designing my own... then getting mandrel bent tubing done at a shop)... that is where the ic-piping thought comes in.
I'm also getting the FMIC... not sure how well it will fit though... and since this will all be on a DSM e/t/l instead of an evo, i'll be looking at custom piping (designing my own... then getting mandrel bent tubing done at a shop)... that is where the ic-piping thought comes in.
This is what the I/C piping on an Evo looks like:
Oct 26, 2002 | 07:02 AM
#20
Guest
Posts: n/a
Originally posted by CooperAWD
What wheel is on the Evo5's? is this a mitsu wheel? or a OZ etc... (i do not know aftermarket wheels at all)
http://www.lancerevolutions.com/gall...shop_1_a_1.jpg here is a picture so you know what wheels I'm talking about.
What is the specs on those wheels? Width, height, weight, and offset?
What wheel is on the Evo5's? is this a mitsu wheel? or a OZ etc... (i do not know aftermarket wheels at all)
http://www.lancerevolutions.com/gall...shop_1_a_1.jpg here is a picture so you know what wheels I'm talking about.
What is the specs on those wheels? Width, height, weight, and offset?
Oct 26, 2002 | 07:18 AM
#21
Guest
Posts: n/a
Originally posted by CooperAWD
So what turbo are you going with Cladius? Something like a 20g? have you looked at any of the FP turbos? (forcedperformance.com)
So what turbo are you going with Cladius? Something like a 20g? have you looked at any of the FP turbos? (forcedperformance.com)
I like it. It just needs to boost more.
Originally posted by CooperAWD
Anyone have recomendations on a 2.5 inch inlet muffler thats not real flashy looking... i'm not crazy about aftermarket exhaust....
Anyone have recomendations on a 2.5 inch inlet muffler thats not real flashy looking... i'm not crazy about aftermarket exhaust....
their exhausts look really crappy!
Oct 26, 2002 | 10:29 AM
#22
Thread Starter
Newbie
Joined: Oct 2002
Posts: 72
Likes: 0
From: OR, USA
Originally posted by Claudius
So, you'd rather install a used (?) Evo I/C and have custom piping made to suit etc. than buying a FMIC kit for your car?
This is what the I/C piping on an Evo looks like:
So, you'd rather install a used (?) Evo I/C and have custom piping made to suit etc. than buying a FMIC kit for your car?
This is what the I/C piping on an Evo looks like:
Last edited by CooperAWD; Oct 26, 2002 at 11:46 PM.
Oct 26, 2002 | 10:32 AM
#23
Thread Starter
Newbie
Joined: Oct 2002
Posts: 72
Likes: 0
From: OR, USA
Originally posted by BurnOutz
You think that intercooler would fit in a 99' Eclipse? Jez wonderin'... prolly not without any custom work done eh?
You think that intercooler would fit in a 99' Eclipse? Jez wonderin'... prolly not without any custom work done eh?
Oct 26, 2002 | 10:35 AM
#24
Thread Starter
Newbie
Joined: Oct 2002
Posts: 72
Likes: 0
From: OR, USA
Originally posted by erikgj
Awesome I/C I was trying to get a look at the I/C on my VII a while ago. Size it up by looking through the bumper does not do it justice.
But your picture sure shows it in its full glory. No wonder the stock one is so hard to beat for the aftermarket manufacturers.
The Evo VII wheel is 17X8JJ, ET+38, PCD=5-114.3, hub dia 60.7 and weighs 10.2kg
Erik
Awesome I/C I was trying to get a look at the I/C on my VII a while ago. Size it up by looking through the bumper does not do it justice.
But your picture sure shows it in its full glory. No wonder the stock one is so hard to beat for the aftermarket manufacturers.
The Evo VII wheel is 17X8JJ, ET+38, PCD=5-114.3, hub dia 60.7 and weighs 10.2kg
Erik
whats the stock tire width on them? 235 is a tight fit...
I guess i'll go with some evo5's OZs... they'd look pretty good
Oct 28, 2002 | 08:10 PM
#28
Thread Starter
Newbie
Joined: Oct 2002
Posts: 72
Likes: 0
From: OR, USA
Originally posted by CooperAWD
Thanks... those are to wide though (i believe)
whats the stock tire width on them? 235 is a tight fit...
I guess i'll go with some evo5's OZs... they'd look pretty good
Thanks... those are to wide though (i believe)
whats the stock tire width on them? 235 is a tight fit...
I guess i'll go with some evo5's OZs... they'd look pretty good
