All Part Number Request Go Here
#1687
Evolved Member
iTrader: (11)
Join Date: Oct 2005
Location: Chicago
Posts: 4,165
Likes: 0
Received 0 Likes
on
0 Posts
03 EVO-Roll pin that holds the master cylinder reservoir to the bottom. The nail I replaced it with is starting to rust.
MR244930
Bill,
Ship it please.
MR244930
Bill,
Ship it please.
Last edited by cfdfireman1; Mar 16, 2007 at 11:30 PM.
#1691
Evolved Member
iTrader: (169)
In the stering column, left hand side, a semi-circular sensor (black and can see the copper) in which the ignition harness plugs into. You would connect a TT harness there as well. There is a white semi-circular part attached which slides in-place (on the other side of that is where you insert your key) Held in-place by a screw. I think it's refred to as the key or ignition cylinder. Thanks!
step #5 is a picture of it.
http://evomoto.com/tech_info.php?tPa...6474354cbd268d
step #5 is a picture of it.
http://evomoto.com/tech_info.php?tPa...6474354cbd268d
Last edited by SLVRNBLK; Mar 16, 2007 at 01:12 PM.
#1692
Evolved Member
iTrader: (4)
Bill, could you give me the prices for:
MD372536 cam seals
I also have two mystery items I need part #'s and prices for:
The rear bolt for the front cross-member:
Along the radiator core support in the front of the car, there is a section of wiring harness that is clipped down by plastic zip tie looking plastic thingies. I need six of them. Thanks!!!
MD372536 cam seals
I also have two mystery items I need part #'s and prices for:
The rear bolt for the front cross-member:
Along the radiator core support in the front of the car, there is a section of wiring harness that is clipped down by plastic zip tie looking plastic thingies. I need six of them. Thanks!!!
Last edited by sonicnofadz; Mar 18, 2007 at 06:21 PM.
#1695
Evolved Member
iTrader: (122)
Join Date: Nov 2005
Location: Coventry, R.I
Posts: 899
Likes: 0
Received 0 Likes
on
0 Posts
In the stering column, left hand side, a semi-circular sensor (black and can see the copper) in which the ignition harness plugs into. You would connect a TT harness there as well. There is a white semi-circular part attached which slides in-place (on the other side of that is where you insert your key) Held in-place by a screw. I think it's refred to as the key or ignition cylinder. Thanks!
step #5 is a picture of it.
http://evomoto.com/tech_info.php?tPa...6474354cbd268d
step #5 is a picture of it.
http://evomoto.com/tech_info.php?tPa...6474354cbd268d
Kind of lost on this one, which piece exactly you need? If you have access to fax, I will more than gladly send you a pic from CAPS and could take it from there?