All Part Number Request Go Here
#3421
Evolving Member
iTrader: (14)
Join Date: Oct 2008
Location: Georgia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
can anyone give me the part number to the balance shaft sprocket (the big one) on a evo 9 and the woodruff key..
also i need the part # to the o-ring in the transfer case that goes between the housing and the dust shield (driveshaft end)..its not a perfect O-ring shaped its wierd i cant explain it..
also i need the part # to the o-ring in the transfer case that goes between the housing and the dust shield (driveshaft end)..its not a perfect O-ring shaped its wierd i cant explain it..
#3422
Former Sponsor
iTrader: (22)
can anyone give me the part number to the balance shaft sprocket (the big one) on a evo 9 and the woodruff key..
also i need the part # to the o-ring in the transfer case that goes between the housing and the dust shield (driveshaft end)..its not a perfect O-ring shaped its wierd i cant explain it..
also i need the part # to the o-ring in the transfer case that goes between the housing and the dust shield (driveshaft end)..its not a perfect O-ring shaped its wierd i cant explain it..
balance shaft tensioner pulley: i think this is what you meant? MD352473
tell me the reference number and ill get you the part number.
#3423
Evolving Member
iTrader: (14)
Join Date: Oct 2008
Location: Georgia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Timing tools: http://www.jayracing.com/index.php?m...roducts_id=214
balance shaft tensioner pulley: i think this is what you meant? MD352473
tell me the reference number and ill get you the part number.
balance shaft tensioner pulley: i think this is what you meant? MD352473
tell me the reference number and ill get you the part number.
i just need the crankshaft key (woodruff key)# and that o ring, but i dont have any reference numbers..
i looked in alldata but it doesnt show either of those..
#3426
Evolving Member
iTrader: (14)
Join Date: Oct 2008
Location: Georgia
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
heres where it is..
heres the pic i took of what i need..its where the groove is on the output shaft
Last edited by 850RCT9A; Dec 11, 2010 at 11:47 AM.
#3433
Evolved Member
iTrader: (33)
Tried searching the list on the first page, came up with a few answer but just trying to verify everything. 2006 5sp ACD. Doing the clutch on it, want to change all o-rings and seals that are related to taking out the tranny and t-case. I have never done a clutch on the car so I dont know what exactly I need. Tried searching and cant come up with a straight answer. Thanks
#3435
Newbie
iTrader: (7)
Join Date: Jul 2007
Location: Wisconsin
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Rheostat or Headlight Leveling Bulb
I'm looking for the part number of the bulb that goes into the rheostat or headlamp adjustment switch.
The bulb only for #8 in this picture:
This bulb here:
The bulb only for #8 in this picture:
This bulb here: