All Part Number Request Go Here
#3886
Evolving Member
iTrader: (4)
Join Date: Jul 2011
Location: St Louis, MO
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Steering Column Fell Off! HELP!
See the pics below its self explanatory. The column keeps falling out of the welded metal cut outs. Now one of the brackets (pic # 3/4) is cracked. Does anyone have a part number for this?? I can't seem to find one :/ Other than getting that replaced the column doesn't seem to line up very well with brackets. No matter how hard I pull the steering wheel towards my body the cut outs barely fit into the slotted brackets fastened to the top of the dash area.
Last edited by AdrenalineRush; Mar 1, 2013 at 11:32 AM.
#3897
Hey, I could use some help figuring out a couple bolt sizes. I'm missing the two bolts at the top of my bumper (not the two clips) and the two bolts for the center of the strut tower. Any help would be great so i can pick them up from the hardware store or wherever.
*Used a buddy's car to figure out bolt sizes
*Used a buddy's car to figure out bolt sizes
Last edited by DVS_DAN; Mar 13, 2013 at 06:54 AM.
#3898
Evolved Member
iTrader: (29)
Can someone help me with the side blinkers - it's called so many different things it's hard to pinpoint exactly what I need:
it's this, except the stock, WHITE version:
Lancershop said it's this but the part # is wrong: http://www.lancershop.com/customer/p...3&cat=0&page=2
::
edit - well i found em for ten bucks but after some soul searching i decided to keep these orange ones. part # would still be nice if someone's got it
it's this, except the stock, WHITE version:
Lancershop said it's this but the part # is wrong: http://www.lancershop.com/customer/p...3&cat=0&page=2
::
edit - well i found em for ten bucks but after some soul searching i decided to keep these orange ones. part # would still be nice if someone's got it
Last edited by kyoo; Mar 12, 2013 at 08:39 PM.
#3899
Evolved Member
iTrader: (15)
For 04-06 Ralliart
Need help finding an adapter/seal type part that goes between the transmission bell housing/motor to increase spacing
The issue I am having is that my new flywheel (clutchmasters aluminum) is thicker than stock and the clutch cover is rubbing against the inside of the bellhousing...I need to squeeze somehow an extra 0.25" or so.
My mechanic thinks there is some sort of an adapter that might go between the tranny/motor to give the inside of the bellhousing a bit of extra room...my old motor (OZ rally) has something like this although it's very thin, thinner than 0.25".
Does anyone know if this part exists and if so what is it's part number and its specs?
Thanks
Need help finding an adapter/seal type part that goes between the transmission bell housing/motor to increase spacing
The issue I am having is that my new flywheel (clutchmasters aluminum) is thicker than stock and the clutch cover is rubbing against the inside of the bellhousing...I need to squeeze somehow an extra 0.25" or so.
My mechanic thinks there is some sort of an adapter that might go between the tranny/motor to give the inside of the bellhousing a bit of extra room...my old motor (OZ rally) has something like this although it's very thin, thinner than 0.25".
Does anyone know if this part exists and if so what is it's part number and its specs?
Thanks