lopillo_evo

iTrader: (3)

axle boot passenger side outer boot part, is the part number MN156750? I got this box with that number but the boot is completely different I was thinking wrong boot in correct box maybe a Lancer boot?

jmb_silvester

if there are someone looking for the partnumber of release bearing of Evo 4,5,6 here it is...
MR145619

WikdEvo

iTrader: (8)

Looking for the part # for the circlip on the driver side output shaft for the transmission

maknuge

iTrader: (20)

I think this is the part #:
MB160387


I would double check before ordering though

AJCaron12

Looking for an oil temperature sensor part # for the MR OEM gauges. The sensor is threaded into the oil pan, where the oil pan drain bolt goes.

MadCrix

iTrader: (6)

u need to buy the entire kit with gauges ect to get the sensor

that is if u can get the kit to buy. mitsu does not sell the sensor by itself

trust me that's what I did but I got a used kit for 50 bucks in the classifieds on this site

kaj

iTrader: (60)

i'm dying here. i please, please, please need the part number for the small, circular spring clip thingy that holds the heat barrier onto the underside of our hoods.

MadCrix

iTrader: (6)

whats your vin number

XSilverJ

iTrader: (6)

mb270053

kaj

iTrader: (60)

You, sir, are awesome.

AJCaron12

This? http://www.streettunedmotorsports.co...p_mb270053.htm

kaj

iTrader: (60)

Yup found that too. Thanks, guys.

ehall20

Anyone have the part number (or aftermarket equivalent) for the tie bar with 3 bolt holes? Item is circled in red below.

XSilverJ

iTrader: (6)

Pretty sure that's not 3 bolt holes it's just two and one bolt is missing so it's not aligned with the hole.. OEM part only has two holes

MR554451

jason42003

iTrader: (18)

Nope def 3 holes 2 on the sides and one in the center that bolts to the cross beam. But that is the right part number.