All Part Number Request Go Here
#4443
Evolved Member
iTrader: (23)
Looking for the part number for the RS ignition switch harness/lock cylinder harness. I keep getting the part number for the immobilizer key ring which is MR587889.
These other part numbers I found are unknown.
MR203094
MR329406 -- seems like an immobilizer key ring too.
I bought part MN184018 and its not the right one.
These other part numbers I found are unknown.
MR203094
MR329406 -- seems like an immobilizer key ring too.
I bought part MN184018 and its not the right one.
Last edited by deylag; Aug 22, 2017 at 12:34 AM.
#4444
Evolved Member
iTrader: (23)
Figured it out! Solution Here: https://www.evolutionm.net/forums/ev...l#post11767067
#4446
Newbie
Join Date: Sep 2017
Location: surrey british columbia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Lf acd pump
Hi guys and girls , new here to the community. After looking up a few readings ,
its turns out out that I need to replace my acd pump located front driver side ( LHD ) , all my lights are on ; Tarmac , gravel , snow and also anti-lock
if anyone has one for sale or a source I can buy from please let me know,
im from Vancouver , British Columbia Canada
email is patrick_supra@hotmail.com
ty in advance !!
its turns out out that I need to replace my acd pump located front driver side ( LHD ) , all my lights are on ; Tarmac , gravel , snow and also anti-lock
if anyone has one for sale or a source I can buy from please let me know,
im from Vancouver , British Columbia Canada
email is patrick_supra@hotmail.com
ty in advance !!
#4448
Newbie
So I'm looking just for drivers side mirror glass with "dead spot" corner like shown on the above picture... Please help
#4449
My car had an aftermarket removable steering wheel when I bought it, I'm looking to go back to an OEM one.
I don't have the 8mm hex bolt that holds the wheel to the column, any chance someone knows the part# or the specs on that bolt? Also, #'s or info on the two bolts that hold the airbag module inside the steering wheel (left and right) would be very much appreciated. Thank you.
I don't have the 8mm hex bolt that holds the wheel to the column, any chance someone knows the part# or the specs on that bolt? Also, #'s or info on the two bolts that hold the airbag module inside the steering wheel (left and right) would be very much appreciated. Thank you.
#4453
Evolving Member
Looking to find the Part number for the JDM/EUDM (Right hand drive) Version of the shifter console.... The entire console itself... With the indentation of the ashtray... and the hole for the cigarette lighter... I purchased an aftermarket carbon fiber shift console plate (top portion) that was made for RHD evo... It has the ashtray and cigarette lighter on the opposite side of my US version evo ix console.. I had to cut mine to get the carbon top plate to fit.. Id like to go back now and locate the oem RHD console and install it properly.. Also.. the 2 little winglet plastic pieces that are located where the driver and passengers feet go that attach to this piece.... if i buy the RHD version will i need to order these 2 plastic pieces as well? or will my us version plastic pieces on left and right side fit the JDM console im looking to purchase?
The US version of the floor center shift console part number is : MR633547
Does anybody know the part number for the EU/JDM version of this console?
It has the ashtray imprint on the opposite side of the console.
The US version of the floor center shift console part number is : MR633547
Does anybody know the part number for the EU/JDM version of this console?
It has the ashtray imprint on the opposite side of the console.
Last edited by iLLevo_; Dec 22, 2017 at 06:32 PM.