All Part Number Request Go Here
Apr 4, 2005, 02:30 PM
#466
Evolved Member
iTrader: (28)
Join Date: Jul 2003
Location: Cheyenne, WY
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by spoolingEVOx
Justin,
Do you have the p/n for the plastic fasteners that i would use on a radiator cooling shroud?
They are located on the factory radiator support.
Do you have the p/n for the plastic fasteners that i would use on a radiator cooling shroud?
They are located on the factory radiator support.
Clips into the radiator support: MR200300
Apr 4, 2005, 02:37 PM
#467
Evolved Member
iTrader: (17)
Join Date: Sep 2003
Location: San Jose, CA
Posts: 1,797
Likes: 0
Received 0 Likes
on
0 Posts
lubes and such
So I've been searching around and looking through this thread, but I cannot find a conclusive list of lube part #'s for the evo.
I'm curious about the 2003 specifically, but if they are different per year can someone list those too?
Looking for:
engine oil
transmission fluid (I understand this is only available in a 5gal bucket)
center diff (transfer case) fluid
rear diff fluid
And of course, for front-diff cars, there's a front diff fluid part # as well.
Many thanks!
I'm curious about the 2003 specifically, but if they are different per year can someone list those too?
Looking for:
engine oil
transmission fluid (I understand this is only available in a 5gal bucket)
center diff (transfer case) fluid
rear diff fluid
And of course, for front-diff cars, there's a front diff fluid part # as well.
Many thanks!
Apr 6, 2005, 07:51 PM
#468
Exhaust Manifold to turbo gasket
Intake manifold gasket
Valve seals (Are E and I different?)
Cooling housing where it meets the cylinder head (housing has t-stat and all sensors on it)
CHRA
Fuel rail feed o-ring or gasket
Fuel rail return o-ring or gasket
Throttlebody gasket
Oil pan
Oil drain tube to turbo gasket
From left field the recirc door for the HVAC system, it is right behind the glove box door and can be seen.
Edit: By the way, can you look up an older 4G63 head for those cam cap dowel pins? At this point I am looking for a junk head to get them out of. Thanks
Hopefully I will leave you alone after this.
Intake manifold gasket
Valve seals (Are E and I different?)
Cooling housing where it meets the cylinder head (housing has t-stat and all sensors on it)
CHRA
Fuel rail feed o-ring or gasket
Fuel rail return o-ring or gasket
Throttlebody gasket
Oil pan
Oil drain tube to turbo gasket
From left field the recirc door for the HVAC system, it is right behind the glove box door and can be seen.
Edit: By the way, can you look up an older 4G63 head for those cam cap dowel pins? At this point I am looking for a junk head to get them out of. Thanks
Hopefully I will leave you alone after this.
Last edited by timzcat; Apr 6, 2005 at 08:06 PM.
Apr 6, 2005, 08:24 PM
#469
Evolved Member
iTrader: (28)
Join Date: Jul 2003
Location: Cheyenne, WY
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by webguy330i
So I've been searching around and looking through this thread, but I cannot find a conclusive list of lube part #'s for the evo.
I'm curious about the 2003 specifically, but if they are different per year can someone list those too?
Looking for:
engine oil
transmission fluid (I understand this is only available in a 5gal bucket)
center diff (transfer case) fluid
rear diff fluid
And of course, for front-diff cars, there's a front diff fluid part # as well.
Many thanks!
I'm curious about the 2003 specifically, but if they are different per year can someone list those too?
Looking for:
engine oil
transmission fluid (I understand this is only available in a 5gal bucket)
center diff (transfer case) fluid
rear diff fluid
And of course, for front-diff cars, there's a front diff fluid part # as well.
Many thanks!
Apr 6, 2005, 08:38 PM
#471
Evolved Member
iTrader: (28)
Join Date: Jul 2003
Location: Cheyenne, WY
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by timzcat
Exhaust Manifold to turbo gasketMR323654
Intake manifold gasket 1540A019
Valve seals (Are E and I different?) Yes, Intake: MD306079 / Exhaust: MD307343
Cooling housing where it meets the cylinder head (housing has t-stat and all sensors on it) MN143307
CHRA MD613507
Fuel rail feed o-ring or gasket FPR O-ring: MD604696
Fuel rail return o-ring or gasket Return line O-ring: MB554317
Throttlebody gasket MD180361
Oil pan MN163343
Oil drain tube to turbo gasket MR258477
From left field the recirc door for the HVAC system, it is right behind the glove box door and can be seen. I'm going to need a picture
Edit: By the way, can you look up an older 4G63 head for those cam cap dowel pins? At this point I am looking for a junk head to get them out of. Thanks
Hopefully I will leave you alone after this.
Intake manifold gasket 1540A019
Valve seals (Are E and I different?) Yes, Intake: MD306079 / Exhaust: MD307343
Cooling housing where it meets the cylinder head (housing has t-stat and all sensors on it) MN143307
CHRA MD613507
Fuel rail feed o-ring or gasket FPR O-ring: MD604696
Fuel rail return o-ring or gasket Return line O-ring: MB554317
Throttlebody gasket MD180361
Oil pan MN163343
Oil drain tube to turbo gasket MR258477
From left field the recirc door for the HVAC system, it is right behind the glove box door and can be seen. I'm going to need a picture
Edit: By the way, can you look up an older 4G63 head for those cam cap dowel pins? At this point I am looking for a junk head to get them out of. Thanks
Hopefully I will leave you alone after this.
Last edited by JustDSM; Apr 6, 2005 at 08:41 PM.
Apr 6, 2005, 08:39 PM
#472
Evolved Member
iTrader: (28)
Join Date: Jul 2003
Location: Cheyenne, WY
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by timzcat
3775610 is the diaqueen on the container and the dealer part delivery sticker no lettered part # on it. (MD,MR, etc)
I had written down the Diamond stuff once, but I've misplaced it.