All Part Number Request Go Here
#481
Evolved Member
iTrader: (28)
Join Date: Jul 2003
Location: Cheyenne, WY
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by timzcat
That's odd. Coverted it to jpeg
You're not going to like this. That piece isn't avail seperately. That whole thing needs to be ordered together.... Yeah... And its $411.52
#483
Evolving Member
iTrader: (12)
Join Date: Jan 2005
Location: DFW
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Can I please have the part numbers for Drain and Fill Plugs for the Transmission, Transfer Case, and Rear Differential. I found the part numbers for all the gaskets (washers) that match these bolts on the "parts list" you provided, but I couldnt find a part number for the bolts. I also need the part number for the metal screws that hold the undertray on. I found the plastic retainer part number on the "list" so I dont need that number.
#485
Evolving Member
iTrader: (12)
Join Date: Jan 2005
Location: DFW
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Ok thats fine. The part # MD000312 which is listed as the trans drain plug gasket, transfer case fill and drain plug gaskets does not work on www.mitsubishi-parts.net ? Will you also look that up and see if its the right part when you come back from out of town? Enjoy your time off!
Thanks Alot!
-Russell King
Thanks Alot!
-Russell King
#490
Evolved Member
iTrader: (44)
Join Date: Oct 2003
Location: Charleston, WV
Posts: 4,409
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking for the part # of the two snap pop things that hold the OEM intake "snorkle" thing to the car.
Also I'm looking for a # on the hose that connects from the valve cover to the intake.. the place where a lot of people use a breather/catchcan
Also I'm looking for a # on the hose that connects from the valve cover to the intake.. the place where a lot of people use a breather/catchcan
#492
Justin, that number for the cooling housing gasket you gave me is the actual housing itself. I just need the gasket.
I also would like that part number for an EGR valve gasket and a PCV hose (cam cover to intake manifold)
I also would like that part number for an EGR valve gasket and a PCV hose (cam cover to intake manifold)
#493
Evolved Member
iTrader: (28)
Join Date: Jul 2003
Location: Cheyenne, WY
Posts: 1,176
Likes: 0
Received 0 Likes
on
0 Posts
Really?! I'm sorry, I'll make sure I pay closer attention. I thought you were asking for the housing. I'm going to be stuck out of town another day. I should be home tomorrow evening if all goes well. I'll reply to everyone then.
#495
Evolving Member
iTrader: (12)
Join Date: Jan 2005
Location: DFW
Posts: 162
Likes: 0
Received 0 Likes
on
0 Posts
Could you please provide me with the part numbers for all 4 motor/transmission mounts? I only need the mounts' part numbers and not the brackets they are mounted in unless thats the only way they come from Mitsubishi. I have labeled the parts I need in the pictures provided. I labeled them 1,2,3,& 4. I need these part numbers because I will be working with an individual who might be willing to fill the stock mounts with polyurethane. They need the factory mounts to make prototypes. See this thread https://www.evolutionm.net/forums/sh...89#post1847489 for more details!
Thanks Again!
Russell K
Thanks Again!
Russell K
Last edited by Russell K; Apr 11, 2005 at 02:14 PM.