People w/ HKS Catback... quick ?
Apr 6, 2005, 08:23 PM
#1
Evolving Member
Thread Starter
iTrader: (8)
Join Date: Feb 2005
Location: Boston, MA
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
People w/ HKS Catback... quick ?
So I purchased a 30th annv. HKS Catback, I got it in, and l'm ready to install it this saturday over at my buddy's shop, but I don't understand what the big plate is for, do I need to bolt this onto my chassie... anyone know anything about this plate, that comes with the catback?
Apr 6, 2005, 09:14 PM
#3
Evolved Member
iTrader: (17)
Join Date: Oct 2004
Location: Tampa
Posts: 559
Likes: 0
Received 0 Likes
on
0 Posts
Yes it bolts onto your chassis, behind the rear tire. You will also move the hanger from the stock muffler and use them on there. It should say on the installation instructions. Good Luck dude.
Apr 7, 2005, 10:45 AM
#5
Evolved Member
iTrader: (3)
Join Date: Dec 2003
Location: Jersey, USA
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
no drilling. you unbolt the stock exhaust hangar holder and replace it with this one. it's easy, no worries.
you should think about some urethane exhaust hangars while you have the exhaust out. i went with kartboy's set.
you should think about some urethane exhaust hangars while you have the exhaust out. i went with kartboy's set.
Apr 7, 2005, 11:55 AM
#7
Ask this question after you try to put it on....believe me, you will figure it out. It bolts to the frame right behind the rear tire. Be sure to remove the rubber hanger near that location though too. You will need that for another place on the exhaust.
Everything really only goes in one place, so it isn't too difficult. Give it shot, and then if you still don't know, ask. But I think once you see it, it will all become clear.
Good luck getting the bolts off!!!!
steinvb12
Everything really only goes in one place, so it isn't too difficult. Give it shot, and then if you still don't know, ask. But I think once you see it, it will all become clear.
Good luck getting the bolts off!!!!
steinvb12
Trending Topics
Apr 7, 2005, 05:21 PM
#11
Evolving Member
Thread Starter
iTrader: (8)
Join Date: Feb 2005
Location: Boston, MA
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys, if all my plans go well, l'll have the exhaust on saturday afternoon, then l'll post some pics and get a few video clips for you fellas, thanks again.
