...only boosting 8psi wtf...
#1
Newbie
Thread Starter
Join Date: Jul 2005
Location: SAN ANTONIO
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
...only boosting 8psi wtf...
ok my evo is only boosting 8 psi it had a magnus manifold,1000cc inj,gt35r setup from south fl prf.,hks cam gears, hks 272s,2step launch control,utech,and wideband o2....but sold all of it went back to stock and now only boosting 8psi? can nyone help?
Trending Topics
#8
Evolved Member
iTrader: (3)
Join Date: Apr 2003
Location: NYC
Posts: 912
Likes: 0
Received 0 Likes
on
0 Posts
1) Wrong forum!!!! (It shouldnt be in Lancer forums AND DEFINITELY shouldnt be in show and shine)
2) Boost leak
3) To find boost leak, get an air compressor or a tank of air, a valve stem, some silicone, plastic cap and a silicone hose BOTH big enough to fit around the turbo and some hose clamps. drill a hole in the cap and put the valve stem in there and silicone around it. put the pieces together and pump 28 psi of gas into the turbo. now listen for hisses
2) Boost leak
3) To find boost leak, get an air compressor or a tank of air, a valve stem, some silicone, plastic cap and a silicone hose BOTH big enough to fit around the turbo and some hose clamps. drill a hole in the cap and put the valve stem in there and silicone around it. put the pieces together and pump 28 psi of gas into the turbo. now listen for hisses
#10
Evolved Member
iTrader: (2)
Join Date: May 2004
Location: Las Vegas
Posts: 1,071
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by TRDHarrier
1) Wrong forum!!!! (It shouldnt be in Lancer forums AND DEFINITELY shouldnt be in show and shine)
2) Boost leak
3) To find boost leak, get an air compressor or a tank of air, a valve stem, some silicone, plastic cap and a silicone hose BOTH big enough to fit around the turbo and some hose clamps. drill a hole in the cap and put the valve stem in there and silicone around it. put the pieces together and pump 28 psi of gas into the turbo. now listen for hisses
2) Boost leak
3) To find boost leak, get an air compressor or a tank of air, a valve stem, some silicone, plastic cap and a silicone hose BOTH big enough to fit around the turbo and some hose clamps. drill a hole in the cap and put the valve stem in there and silicone around it. put the pieces together and pump 28 psi of gas into the turbo. now listen for hisses