geddy 25g on a mustang dyno
#1
Evolving Member
Thread Starter
iTrader: (25)
Join Date: Mar 2004
Location: NC
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
geddy 25g on a mustang dyno
ok we dyno the greedy kit on monday night heres my mods
greddy 25g kit
3inch turbo back
hks 264intake 272exhaust
greddy front mount
super afc
greddy boost controller
flashed ecu
k&n filter with custom mass pipe
8.5mm wires
walbro fuel pump
at 20 psi it made 322hp and 291tor
at 25 psi it made 393hp and 340tor
at 28 psi it made 445hp and 370tor
with straight 110octane it seem to hold timing perfect and knock was pretty on the afc controller, it peek around 70s. but i am real happy with it, it felt really good on the road afterwards. were are taking it to rockingham, in hopes to turn 120mph or plus.
i would like to say thanks to turbodawg, chris, and josh for all of their had work on the install and tuning. i hope to get the sheets up in the next couple of days. no scanner so im taking them to turbodawg if he can do it for me.
the mustang dyno numbers is kind of low but we think it would be close to 500 at the wheels and over 550 at the crank.
i got to say the turbo is laggy but i like it pretty good.
heres the sheets.
greddy 25g kit
3inch turbo back
hks 264intake 272exhaust
greddy front mount
super afc
greddy boost controller
flashed ecu
k&n filter with custom mass pipe
8.5mm wires
walbro fuel pump
at 20 psi it made 322hp and 291tor
at 25 psi it made 393hp and 340tor
at 28 psi it made 445hp and 370tor
with straight 110octane it seem to hold timing perfect and knock was pretty on the afc controller, it peek around 70s. but i am real happy with it, it felt really good on the road afterwards. were are taking it to rockingham, in hopes to turn 120mph or plus.
i would like to say thanks to turbodawg, chris, and josh for all of their had work on the install and tuning. i hope to get the sheets up in the next couple of days. no scanner so im taking them to turbodawg if he can do it for me.
the mustang dyno numbers is kind of low but we think it would be close to 500 at the wheels and over 550 at the crank.
i got to say the turbo is laggy but i like it pretty good.
heres the sheets.
Last edited by blowoffsilver; May 20, 2007 at 12:05 PM.
#7
I'm no pro, and I don't know alot...but maybe the A/R is too high? Seems like you're not making good power unless you're running high boost...Lemme see the dyno charts, because that is what will really show us what's going on....Better yet, take it to the track and run it, that'd be more standard....
Trending Topics
#8
Evolved Member
iTrader: (54)
Join Date: Jan 2003
Location: NC
Posts: 1,181
Likes: 0
Received 0 Likes
on
0 Posts
Mitsubishi does lists A/R in a different method than most other people. The equivalent A/R for the Greddy T67 25G is a 10cm. This is slightly smaller in nozzle area than the 10.5 housing that is on the stock 16G6 turbo on a stock 2005 or newer Evo. There is an alternative size that is even smaller, a 8cm nozzle area. The turbo that he is using here is the 10cm unit.
I will get the scans of the dyno runs done as soon as he brings me the dyno sheets.
Brian
I will get the scans of the dyno runs done as soon as he brings me the dyno sheets.
Brian
#9
Evolved Member
iTrader: (125)
The 25g spools faster and is a very enjoyable turbo with the 8cm housing. The turbo has a bad name because everyone gets it with the 10cm. I know many accounts of the 8cm/25g laying down 525whp plus. There is no benifit to the 10cm. Just slower spool. You cant compare twin scroll numbers to single scroll numbers. A 10cm twin scroll prolly has more backpressure than a 8cm single.
#10
Evolving Member
Thread Starter
iTrader: (25)
Join Date: Mar 2004
Location: NC
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
it reachs full boost at 4800 to 5000
am im trying to get the sheets to turbodawg, but went to the track last night 1/8 mile it went 1.8 60foot 7.56at96.4mph which i thought was real good on the stock clutch
am im trying to get the sheets to turbodawg, but went to the track last night 1/8 mile it went 1.8 60foot 7.56at96.4mph which i thought was real good on the stock clutch
#11
Evolved Member
iTrader: (5)
Join Date: Dec 2003
Location: Work - New York, Alaska, Mexico or the Caribbean. -Home - Tx Hill Country
Posts: 1,858
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blowoffsilver
it reachs full boost at 4800 to 5000
am im trying to get the sheets to turbodawg, but went to the track last night 1/8 mile it went 1.8 60foot 7.56at96.4mph which i thought was real good on the stock clutch
am im trying to get the sheets to turbodawg, but went to the track last night 1/8 mile it went 1.8 60foot 7.56at96.4mph which i thought was real good on the stock clutch