Aftermarket oil filter NO NO! (pics)
#31
Evolved Member
iTrader: (23)
Join Date: Jun 2004
Location: Orlando FL
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hashiriya
I use the same filter and have had no troubles with it. My car is dropped almost 2 inches as well.
I thought the K&N 1008 was just a bit smaller than OEM though.
I thought the K&N 1008 was just a bit smaller than OEM though.
I don't like the idea of using block adapters for sensors anyway, particularly given that the OEM filter block already has two integrated ports for sensors. The thread pitches of the ports are not right for most temp. and pressure sensors that are included with the corresponding gauges, but NPT-type adapters are easily sourced to forgo using a block adapter that lowers the height of the filter.
No one can make the argument that all aftermarket oil filters are bad when there were other extenuating circumstances (lowered height due to filter block adapter and potential collision with something) and that many people use aftermarket filters with great success.
#32
EvoM Staff Alumni
iTrader: (106)
Wow the dealership propaganda Mitsu used to offer the proper filter for the Evo here in the states but then as they began seeing themselves slip away into the path bankruptcy they have ultimately brought upon themselves they decided to consolidate all variations of their oil filters into two models. One for larger displacement engines and one for smaller. Go run a stock filter for 3000 miles and then run an Amsoil filter for the same. Cut both of them open and judge for yourself. We aren't dealing with GM quality factory parts here. Take a look at the grade of bolts mitsu offers as their factory stuff, I jump at the chance to replace any I can with stainless or grade 8
edit: Isn't their a bolt in the oil filter housing that can be removed and it's corresponding hole used for an oil pressure sensor instead of having to go the route of a sandwich adaptor?
edit: Isn't their a bolt in the oil filter housing that can be removed and it's corresponding hole used for an oil pressure sensor instead of having to go the route of a sandwich adaptor?
Last edited by mitsuorder; Jan 2, 2006 at 12:11 PM.
#35
Evolved Member
iTrader: (13)
Join Date: Sep 2005
Location: St. Helens, Oregon
Posts: 765
Likes: 0
Received 0 Likes
on
0 Posts
The longer filters, like the one pureolator suggests sit too far down for a car like the evo.
Im not suprised this happened at all because when I changed my oil last week I was pretty disapointed in the filter sitting so low and thought to myself wtf happens if something hits it.
Im not suprised this happened at all because when I changed my oil last week I was pretty disapointed in the filter sitting so low and thought to myself wtf happens if something hits it.
#38
Evolved Member
be careful with filters for the Evo. Fram, Wix, and the other not so credible companies list the same filter for the regular Lancer and Evo, and they will fit. Like the previous guy said, K&N, Bosch, and Mobil1 lists a different filter for the Evo. The main differences? height and width of filter. Another note worthy tidbit is that manufacturers use a smaller filter for higher oil pressures. I'm pretty sure the Evo requires more pressure than the regular Lancer.
#40
Evolving Member
Thread Starter
iTrader: (20)
Join Date: Nov 2004
Location: Detroit area
Posts: 372
Likes: 0
Received 0 Likes
on
0 Posts
Again, this is not to bad mouth a product....just to make you aware of the potential problem of longer filters and sandwich adapters.
And yes the car is lowered about 1.5"
It is fairly easy to replace the oil filter adapter that bolts to the oil pump. the hardest part is removing the plastic t-belt cover to get to the final bolt/
and yes there are two provision for adding pressure or temp gauges on the factory housing............I was actually already using one for pressure.
part cost $75.00 and .99 for the gasket.
Mattj
And yes the car is lowered about 1.5"
It is fairly easy to replace the oil filter adapter that bolts to the oil pump. the hardest part is removing the plastic t-belt cover to get to the final bolt/
and yes there are two provision for adding pressure or temp gauges on the factory housing............I was actually already using one for pressure.
part cost $75.00 and .99 for the gasket.
Mattj
#41
Evolving Member
Join Date: Feb 2004
Location: Merced Ca
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
I was wordering how you guys know which filter performs better than the other. I use OEM and it costs less than after market ones. Try these people http://www.mitsupartsdirect.com. If you buy 3 or more you get 30% off. It only costs me like $5.00 a filter.
#42
People that drive to the dealer and use factory oil filters crack me up. I'm sorry, I know your heart is in the right place but there are some decent filters at your local autozone.
I normally put K&N filters on mine, and Mobil 1, 30 bucks total normally.
Seriously though, do you run to the mitsu dealer for brake fluid and anti-freeze too?
I normally put K&N filters on mine, and Mobil 1, 30 bucks total normally.
Seriously though, do you run to the mitsu dealer for brake fluid and anti-freeze too?
#43
a sandwich adapter is used to lower the filter...it's basically like an extension of the block..
they supposedly help the engine warm up faster. it is also used to allow installation of an oil cooler without relocation of the oil filter.
they supposedly help the engine warm up faster. it is also used to allow installation of an oil cooler without relocation of the oil filter.
Last edited by itsmeek; Jan 3, 2006 at 05:37 AM.
#44
Evolved Member
iTrader: (23)
Join Date: Jun 2004
Location: Orlando FL
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
The K&N part number HP1008 retails for just over $16 at my local parts store and works perfectly fine.
I don't mean to sound like a broken record, but it really works, and it works well.
Yes, it's a very little bit narrower than the OEM, but for those of you worried about it, you shouldn't be. The width of the sealing surface for the OEM filter block is wide enough that it will still offer a perfect sealing surface to a slightly narrower filter, which the K&N is.
I can't comment on it's filtering capability compared to an OEM filter nor to other aftermarket filters as I've never compared them, nor do I have the technical expertise nor equipment to do so, but I've never heard one bad thing about K&N oil filters, ever.
I don't mean to sound like a broken record, but it really works, and it works well.
Yes, it's a very little bit narrower than the OEM, but for those of you worried about it, you shouldn't be. The width of the sealing surface for the OEM filter block is wide enough that it will still offer a perfect sealing surface to a slightly narrower filter, which the K&N is.
I can't comment on it's filtering capability compared to an OEM filter nor to other aftermarket filters as I've never compared them, nor do I have the technical expertise nor equipment to do so, but I've never heard one bad thing about K&N oil filters, ever.
Thread
Thread Starter
Forum
Replies
Last Post