GT3071R GTI vs Evo IX. 80-130mph roll
May 14, 2006, 10:51 AM
#1
Newbie
Thread Starter
Join Date: May 2006
Location: South Florida
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
GT3071R GTI vs Evo IX. 80-130mph roll
A friend running a GT3071R on his GTI is challenging my stock Evo IX to race from an 80mph roll. Considering that even on a very modest tuning, I know he must be somewhere in the 310-350 whp. Any thoughts on racing FWD cars from an 80mph roll??
May 14, 2006, 10:54 AM
#3
Originally Posted by WTF hX
A friend running a GT3071R on his GTI is challenging my stock Evo IX to race from an 80mph roll. Considering that even on a very modest tuning, I know he must be somewhere in the 310-350 whp. Any thoughts on racing FWD cars from an 80mph roll??
May 14, 2006, 10:55 AM
#4
Originally Posted by WTF hX
A friend running a GT3071R on his GTI is challenging my stock Evo IX to race from an 80mph roll. Considering that even on a very modest tuning, I know he must be somewhere in the 310-350 whp. Any thoughts on racing FWD cars from an 80mph roll??
PS Take it to the track
May 14, 2006, 11:06 AM
#7
Evolved Member
iTrader: (5)
Join Date: Jun 2005
Location: dartmouth
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
i think he will win. actually gti's are lighter then evo's and with even 300whp he should have no problem walking away from you at 80mph. If he wont go from a dig, atleast start at like 45mph and do some brake boosting in third. Perhaps this way you can catch some of his traction issues, which im sure he has.
Trending Topics
May 14, 2006, 11:10 AM
#8
Newbie
Thread Starter
Join Date: May 2006
Location: South Florida
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Yes, he has 2 door MK4 GTI, the curb weight is a lilttle over 3K I believe. He has not gone dyno with this set-up yet. The kit he bought was put together by Kinetic Motorsport and the software was tuned by Unitronics.
Garrett GT3071R (0.64)
ATP manifold & downpipe (fitting sucked!)
475cc Injectors
Kinetic MS FMIC
Unitronics Custom Software
Garrett GT3071R (0.64)
ATP manifold & downpipe (fitting sucked!)
475cc Injectors
Kinetic MS FMIC
Unitronics Custom Software
May 14, 2006, 11:13 AM
#9
Originally Posted by WTF hX
Yes, he has 2 door MK4 GTI, the curb weight is a lilttle over 3K I believe. He has not gone dyno with this set-up yet. The kit he bought was put together by Kinetic Motorsport and the software was tuned by Unitronics.
Garrett GT3071R (0.64)
ATP manifold & downpipe (fitting sucked!)
475cc Injectors
Kinetic MS FMIC
Unitronics Custom Software
Garrett GT3071R (0.64)
ATP manifold & downpipe (fitting sucked!)
475cc Injectors
Kinetic MS FMIC
Unitronics Custom Software
May 14, 2006, 11:17 AM
#12
Evolved Member
iTrader: (5)
Join Date: Jun 2005
Location: dartmouth
Posts: 530
Likes: 0
Received 0 Likes
on
0 Posts
actually 475cc injectors should be good for about 300whp all day. So its only a 1.8 liter engine, but those 1.8t motors are pretty well built and certainly flow well. Think about having 20psi of boost with that exact setup on an evo. You still dont think he has about 300whp with the advantage of only having 2wd?
Last edited by bacalhau16; May 14, 2006 at 11:22 AM.
