Notices
Evo General Discuss any generalized technical Evo related topics that may not fit into the other forums. Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central

Floor Jack Recommendation?

Thread Tools
 
Search this Thread
 
Old May 23, 2006 | 10:37 AM
  #1  
Alacris's Avatar
Thread Starter
Evolving Member
 
Joined: Apr 2004
Posts: 188
Likes: 4
From: Virginia
Floor Jack Recommendation?

I searched on this and did not find a lot of information. I did find plenty on jack points and hockey pucks (great idea BTW), but not much on the actual jacks themselves.

My old $20 walmart special finally crapped out on me. It had limited range and took twenty pumps to get the car up anyway.

So I'm looking for a replacement. I need it to be light (aluminum???), since I have to carry it from my basement outside to the car. I'd like it to be a quick pump, if possible. I've read some can get to full height in 6 pumps. And I'd like as much height as possible. I have a creeper now, so a couple extra inches of height will make for a lot more comfort.

Here's a couple I've found, let me know if you all have any experience with these:
http://www.sears.com/sr/javasr/produ...seBVCookie=Yes
$180 -- yikes, but may be worth it.
http://www.harborfreight.com/cpi/cta...emnumber=40105
Less capacity and height, but lighter and cheaper.

Thanks in advance,
AC
Old May 23, 2006 | 10:47 AM
  #2  
LetItBreath's Avatar
Evolved Member
 
Joined: Sep 2005
Posts: 712
Likes: 0
From: City O Sin, MA...the not so sinish part though...
whatever you get make sure its low enough to the ground to clear the skirts. I'd recomment measuring the distance from your floor to the bottom of the skirt, then from the jack points to the edge of the skirts.
Old May 23, 2006 | 10:52 AM
  #3  
Kryptonite's Avatar
Evolving Member
 
Joined: Oct 2003
Posts: 218
Likes: 0
From: Large Steel Building
I purchased a low rider aluminum jack at the end of last year and it will fit under almost and thing. Has a flat jacking pad and slides easily under the frt of my dragster (4 inches at the chassis nose) but are a bit pricey. Around $350.00 but super light weight and very easy to handle.
Old May 23, 2006 | 10:56 AM
  #4  
justchil's Avatar
Evolved Member
iTrader: (44)
 
Joined: Oct 2003
Posts: 4,409
Likes: 0
From: Charleston, WV
This is what I use:

http://www.sears.com/sr/javasr/produ...seBVCookie=Yes

They also have one like this that supports 4000lbs.
Old May 23, 2006 | 11:07 AM
  #5  
AtomicArmy's Avatar
Newbie
iTrader: (2)
 
Joined: May 2006
Posts: 49
Likes: 0
From: Northern Mi
Originally Posted by justchil
This is what I use:

http://www.sears.com/sr/javasr/produ...seBVCookie=Yes

They also have one like this that supports 4000lbs.
x2
Old May 23, 2006 | 11:14 AM
  #6  
naucrx's Avatar
Evolved Member
iTrader: (19)
 
Joined: May 2003
Posts: 1,406
Likes: 1
From: Columbus, OH
Originally Posted by justchil
x3!!!

This is an awesome jack!! 3000lb capacity which is plenty for the EVO and only $119.
Old May 23, 2006 | 11:17 AM
  #7  
Alacris's Avatar
Thread Starter
Evolving Member
 
Joined: Apr 2004
Posts: 188
Likes: 4
From: Virginia
Thanks for the replies.

2 questions on that Sears jack:
How many pumps to get the car up?
How unwieldy is that 55 pounds? I'm carrying this up a flight of stairs every time. so weight is a really big deal to me (although I could stand to bulk up a bit )

Thanks,
A
Old May 23, 2006 | 11:21 AM
  #8  
justchil's Avatar
Evolved Member
iTrader: (44)
 
Joined: Oct 2003
Posts: 4,409
Likes: 0
From: Charleston, WV
It takes like 2 full pumps to get the tires off the ground... It's kind of heavy to carry around but it's not too bad.
Old May 23, 2006 | 11:55 AM
  #9  
Mmelmann's Avatar
Evolving Member
iTrader: (1)
 
Joined: Feb 2006
Posts: 407
Likes: 0
From: N. Cackalaki
Originally Posted by justchil
This is what I use:

http://www.sears.com/sr/javasr/produ...seBVCookie=Yes

They also have one like this that supports 4000lbs.
x4

My jack leaks a little bit though but it's sure a good one for what you are looking for. It's pretty light but it packs a good punch.
Old May 23, 2006 | 12:17 PM
  #10  
hova00's Avatar
Evolved Member
iTrader: (6)
 
Joined: Apr 2005
Posts: 505
Likes: 0
From: WILMINGTON
Just bought that craftsman jack yesterday for 120.00. Worked good and looks good.
Old May 23, 2006 | 12:30 PM
  #11  
aklucsarits's Avatar
Evolving Member
iTrader: (2)
 
Joined: Jan 2006
Posts: 344
Likes: 0
From: Philly, PA
Originally Posted by Alacris
Here's a couple I've found, let me know if you all have any experience with these:
http://www.sears.com/sr/javasr/produ...seBVCookie=Yes
$180 -- yikes, but may be worth it.
^^^I've got that 2 ton aluminum one from Sears. It's very nice, but it might be overkill for your needs. That one is perfect for very low cars. I use it to hit the front and rear center jack points on my Honda S2000.

I also have this Sears jack:
http://www.sears.com/sr/javasr/produ...seBVCookie=Yes
That one only costs $40, and it comes with a nice hard shell carry case. This one is perfect if you just need a tire changing jack. But the arm is probably too short for hitting center jack points on most cars. I do have a problem with it in cold weather. I can't use it outdoors if the temp is less than 40 deg F. Mine is pretty old though...
Old May 24, 2006 | 05:10 AM
  #12  
Alacris's Avatar
Thread Starter
Evolving Member
 
Joined: Apr 2004
Posts: 188
Likes: 4
From: Virginia
The cold weather problem sounds like my old jack. Wouldn't work unless it was warm and you talked to it just right It was about 10 years old when I finally pitched it.

I think I'll swing by sears tonight and check them all out. Either of the $120+ models should work. I just want to use my own judgement to see if the cheaper one is too heavy. I'm glad to hear they both have worked well for you all.

Thanks for the help,
AC
Old May 24, 2006 | 05:27 AM
  #13  
Tom Selleck's Avatar
Newbie
 
Joined: May 2006
Posts: 27
Likes: 0
From: PA
Sounds like you've pretty much made up your mind, but this is what I bought and use...

http://www.sears.com/sr/javasr/produ...seBVCookie=Yes

Says it handles 3 tons, which is a little bit of overkill, but it's cheaper than the other one you were looking at, plus has 2 jack stands. The creeper is alright too, although I never did the whole "take it apart into 2 sections" thing.

I haven't used this on my Evo yet, but it worked just fine on my 02 Civic.
Old May 25, 2006 | 10:46 AM
  #14  
Alacris's Avatar
Thread Starter
Evolving Member
 
Joined: Apr 2004
Posts: 188
Likes: 4
From: Virginia
I already have a creeper and four jack stands, but thanks. I'm glad nobody here has had problems with their craftsman jacks.

I ended up getting the $120 one. It's aluminum and steel instead of all aluminum. It is supposed to weigh 10 pounds more, but to be honest, I could not tell a difference from one box to the next. Since they seemed to weigh the same, and I'm looking at spending $200+ just for parts on my 30k service, I figure cheaper is better

The all aluminum one was nice, though . . .

Thanks again for all the advice.

AC
Old May 25, 2006 | 11:41 AM
  #15  
Stew's Avatar
Evolved Member
iTrader: (11)
 
Joined: Sep 2005
Posts: 834
Likes: 0
From: CT
I have the 4000lb race jack (first link) and it's AWESOME. Worth the $180 IMHO.


Quick Reply: Floor Jack Recommendation?



All times are GMT -7. The time now is 01:40 AM.