Intercooler upgrade question.....
#1
Evolving Member
Thread Starter
iTrader: (9)
Join Date: May 2006
Location: Springfield, MO
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Intercooler upgrade question.....
I am wanting to install my intercooler upgrade that i had made. The only question i have is will it be safe to install it with my hardpipe kit without a re-flash? Whats your .02?
Thanks in advance.
Thanks in advance.
#3
Evolving Member
Thread Starter
iTrader: (9)
Join Date: May 2006
Location: Springfield, MO
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ultimate CC
it will definitely throw off the tune but how much it all depends on the pressure drop and other factors of your new kit, what fmic is it?
well its a custom intercooler made by a good friend of mine. He is a machineist and he also fabs up stainless manifolds and also just about anything aluminum.
The specs of the intercooler:
Bar and plate style, 12" x 28" (with endtanks) x 3.75"
and with our calculations it should flow right at 1100 cfm with about 1 psi of pressure drop.
#5
Evolved Member
iTrader: (55)
if you have a wide band (or have access to one), then just throw the intercooler and hard pipes on and hook up the wide band. if you a/f didn't change much, then you're safe. that's why i like having a wide band and safc on top of a custom flash, cause i didn't want to have to reflash every time i add a simple mod.
#6
Evolving Member
Thread Starter
iTrader: (9)
Join Date: May 2006
Location: Springfield, MO
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by honda-guy
if you have a wide band (or have access to one), then just throw the intercooler and hard pipes on and hook up the wide band. if you a/f didn't change much, then you're safe. that's why i like having a wide band and safc on top of a custom flash, cause i didn't want to have to reflash every time i add a simple mod.
So where do most evo owners install theirs for accurate readings?
#7
Evolved Member
iTrader: (16)
Join Date: Mar 2005
Location: CT
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
Are you serious with that sig? It takes up the whole damn screen. If you feel the need to list every single mod you have so everyone knows, at least list them horizontally.
Last edited by fsugatorbait; May 26, 2006 at 08:36 AM.
Trending Topics
#11
Evolved Member
iTrader: (55)
Originally Posted by EiEVO
Another simple question: I do have a aem gauge wideband. And im new to the dsm family but on other turbo vehicles i have owned and built up i always put my WB o2 bung about 6" down on the downpipe. I know aem suggest about a 10 deg angle when installed but i have had better luck with it just about straight in there so the air wasn't flowing towards the bottom of it, it was flowing towards the side of the sensor first... I know that was confusing.
So where do most evo owners install theirs for accurate readings?
So where do most evo owners install theirs for accurate readings?
#12
Evolving Member
iTrader: (10)
Join Date: Feb 2003
Location: Phoenix, AZ
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
I had the same question on the location of that bung. I called and spoke to an AEM rep. He said it is fine to put it where you indicated. He advised on being very cautious of putting it to close to the turbo, or it might burn up faster.
#13
Evolving Member
Thread Starter
iTrader: (9)
Join Date: May 2006
Location: Springfield, MO
Posts: 427
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by fsugatorbait
Are you serious with that sig? It takes up the whole damn screen. If you feel the need to list every single mod you have so everyone knows, at least list them horizontally.
If you have a problem with my sig and it really bothers you...The you could have PM'd me. If you have no advice or suggestions pertaining to the thread please dont reply.
#14
Evolved Member
iTrader: (16)
Join Date: Mar 2005
Location: CT
Posts: 1,338
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by EiEVO
If you have a problem with my sig and it really bothers you...The you could have PM'd me. If you have no advice or suggestions pertaining to the thread please dont reply.
Oh the irony.
#15
Evolved Member
iTrader: (4)
Join Date: Sep 2003
Location: Kingdom of Saudi Arabia
Posts: 3,456
Likes: 0
Received 0 Likes
on
0 Posts
Had my WB right after the 90 degree bend on the DP. Readings are consistant
Originally Posted by EiEVO
Another simple question: I do have a aem gauge wideband. And im new to the dsm family but on other turbo vehicles i have owned and built up i always put my WB o2 bung about 6" down on the downpipe. I know aem suggest about a 10 deg angle when installed but i have had better luck with it just about straight in there so the air wasn't flowing towards the bottom of it, it was flowing towards the side of the sensor first... I know that was confusing.
So where do most evo owners install theirs for accurate readings?
So where do most evo owners install theirs for accurate readings?