51

iTrader: (8)

I'm wondering if the Evo IX has the same clutch restrictor that is in the Evo VIII. I took mine off my old VIII & want to take the one out of the IX but before I do this I need to make sure that there is one in there. Has anyone done this just to confirm that there is one in there? Thanks.

BlueFish

iTrader: (5)

I looked in to doing that with my 9 and did find the instructions for the 8 but the wiring is different. I was told it has to be tuned out.

manny85382

iTrader: (5)

What do you mean by a clutch restrictor?

51

iTrader: (8)

BlueFish,

This is not what you think. This is the clutch restrictor inside the clutch slave cylinder. As for what you are talking about that is the 5k rev limiter, yes I have disconnected mine already by just un-plugging the connector to the sensor.

DrSmile

iTrader: (2)

Wow to the above replies...

The clutch restrictor is still there on the IX. I removed mine this weekend. Very easy once you take off the MAF and filter housing. I was going to replace the rubber line to the master also but decided against it after seeing how wedged and hidden the top bolt is.

51

iTrader: (8)

Thanks DrSmile for the info. Yes it is very easy to remove. I did this on my Evo VIII but did not want to go throught the process if it is not even there. Thanks again.