Buschur LICP or Buschur o2 housing for next mod?
Sep 23, 2006, 12:49 AM
#2
Both mods are good. The LICP is much easier to do and is a great mod. Get the LICP first I would say. I have the Buschur LICP on the Evo 9 and it make a huge difference.
Look my post, I posted pictures of the install as well. Look under fromwrxtoevo or under evo9grl.
Carlos
Look my post, I posted pictures of the install as well. Look under fromwrxtoevo or under evo9grl.
Carlos
Sep 23, 2006, 01:08 AM
#4
Tony B,
I should also make the remark that I got to see two dyno sheets from two friends that have Evos which installed the 02 Hosuings and managed better spool and and increase of the torque curve at earlier point.
One of the members is fastrob691(Rob), the other Evo member is Bill (technishnIX)
Carlos
I should also make the remark that I got to see two dyno sheets from two friends that have Evos which installed the 02 Hosuings and managed better spool and and increase of the torque curve at earlier point.
One of the members is fastrob691(Rob), the other Evo member is Bill (technishnIX)
Carlos
Last edited by fromWRXtoEVO; Sep 23, 2006 at 01:11 AM.
Sep 23, 2006, 05:24 AM
#5
Evolved Member
iTrader: (6)
Join Date: Mar 2006
Location: NY
Posts: 643
Likes: 0
Received 0 Likes
on
0 Posts
LICP due to ease of installation, if you're going to do an o2 housing save up a few more dollars and get a header or get the stocker ported and install it at the same time. The buschur ported/coated manifold runs about $200 after you send them back your core and the ebay o2 housing is about $50 and licp's run about $200-$250 so its a toss up imo.
Thread
Thread Starter
Forum
Replies
Last Post
DG Motors
Vendor Service / Parts / Tuning Review
30
Mar 19, 2008 04:01 PM
