35r fmic suggestion
#18
Originally Posted by daisaw1219
the ebay fmic for the evo fits perfectly....you need straight couplers and not the factory hoses. As for the mounts the side ones fit perfectly but the top one takes a slight bend....matter fact you can see the mark where you need to bend it becasue they outlined it
The straight couplers wouldn't work as the inlet/outlet tubes are angled.
The angle isn't enough to be able to use the factory couplers, nor straight enough to
straight coulers.
http://cgi.ebay.com/ebaymotors/jdm-E...spagenameZWDVW
So far here are the problems:
1.) Bolted up, the core sits about 1" too far to the right.
2.) The right side bracket doesn't align correctly.
3.) The angle of the inlet/outlet tubes are incorrect.
Last edited by EVO8emUp; Oct 6, 2006 at 01:16 PM.
#23
Originally Posted by EVO8emUp
The core and tanks are OK. I ended up making a temporary jig from the stock IC, and ordered a 90 deg aluminum mandrel bend to make new inlet/outlet ports. I just want to see how much work is involved to make one fit, then publish the time and cost to show ppl that they really don't save that much $$$ by going with these units.