filter

iTrader: (1)

and the rest of my gauges came in. also anyone install the defi fuel pressure gauge?? if so msg me plz




and yes i know that i dont have the screw hole covers in yet.

kreionic

iTrader: (14)

Why didn't you get the piller with the tweeter holes?

WrX Kila

iTrader: (18)

What other mods you have?

filter

iTrader: (1)

cause im 29 years old had a 156db stereo since i was 16. at this point i do not care for a stereo in my car. (losing hearing)

TSiAWD666

iTrader: (5)

Where did you buy that a-pillar replacement?
Does it overlay the existing or replace it entirely?
How's the color match?
When sitting in the driver's seat, are the gauge faces all perpendicular to your line of sight when looking at them? If so, did this take fudging with their orientation or are they flush with the a-pillar pods?

Thanks

filter

iTrader: (1)

i but it at lancer shop. it over lays the current one there. (im sure you can replace it but not meant to be replaced by this.

color matches perfect (im a guy and looks close enough to me)
only one is the top gauge for eye sight is not as good as the bottom 2. but it works.


we had to dremmel for the defi 60mm gagues to fit. i ordered the 60mm one but we still had to dremmel to get teh defi gauges to fit. They are fit flush.

hope that helps some.

TSiAWD666

iTrader: (5)

Thanks for all those answers

One other question. When sitting in the driver's seat and looking at the gauges, can you see the entire face of each gauge, or are some obscured by the others?

I ask because I have some 60mm gauges in my eclipse with a-pillar replacement and top gauge obstructs the view of the middle, and the middle obstructs the view of bottom. Kind of annoying, and it means I have to orient the gauges so that the range I typically care about is in view as much as possible.

filter

iTrader: (1)

nope you can see each gauge with no overlapping