I've seen a few "grocery lists" of size and amount of the t-bolts needed to do a IX, but every thread has contradicting info on sizes. Has anyone compiled a list? I also need a source.

Thanks,
Charlie

 

There's a pic floating around on here somewhere from the service manual with all of them listed and sized. I can't remember if it was in the How-To section or not.

I used that and had no problems with the bigger clamps, but the 1.5" clamps I bought were too big for the connections labeled 1.5" on the diagram.

Edit: https://www.evolutionm.net/forums/sh...ght=Clamp+List

I used that list and ordered from that site. The 1.5" clamps were too big for the parts on my IX, the rest were perfect.

 

Search the intraweb for Breeze constant torque clamps. They are cheaper and much better than the ole standard clamps.

 

Can I assume that I need the following for a IX:

1 - 3"
3 - smaller than 1.5"
7 - 2.5"
2 - 2"

 

The rest of the diagram in that thread I linked was dead-on.

If that is the parts list from that thread, then yes. =)

 

I used a 2.75" instead of 3", worked fine.

I have heard of some 3" being too big for the TB.