Problem w/ Defi's after Wb02 install
#1
Newbie
Thread Starter
Join Date: Feb 2007
Location: Earth
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Problem w/ Defi's after Wb02 install
Hi all. After installing my Innovate XD-16/LC-1 last night, my Defi's only worked when I turned either the parking lights or driving lights on. When the car is running and the lights are off, the gauges go off as well. I found this odd since I never touched the Defi wiring. The only thing I can think of, is that I tapped the power to my Xd-16/LC-1 to the same constant 12v that the Defi's and my V1 are taeppd into (radio). Is it possible that I'm pulling too much juice with all three accessories? Does anybody have any idea what I could have done? Thanks
#2
Evolving Member
iTrader: (17)
Join Date: May 2007
Location: south fl
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
you have a wire wrong from the defi, or right according to some write ups ,i had mine like that at one point ,but then i changed it to come on with ignition...i belive i just diconected the white wire ..