Defi installed. Questions...
#1
Defi installed. Questions...
Just finished up a 60MM DEFI BF Boost (Imperial) gauge install with CUII.
When the opening ceremony starts, its does the full sweep forward but coming back it ticks. Just wondering if this was normal?
Also, I was tuned for 22PSI. The Defi peaked at 24PSI. Are defi's inaccurate?
Thanks in advance.
When the opening ceremony starts, its does the full sweep forward but coming back it ticks. Just wondering if this was normal?
Also, I was tuned for 22PSI. The Defi peaked at 24PSI. Are defi's inaccurate?
Thanks in advance.
#6
Evolving Member
iTrader: (8)
Join Date: Apr 2007
Location: WI
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
I have the Defi Blue Racer Gauges, and I haven't heard any ticking coming from any of the 3 I have installed. I'll chime in later when I have AMS tune my car, too see if the boost gauge matches what it's tuned for.
Trending Topics
#8
Newbie
Join Date: Aug 2006
Location: Nashua, New Hampshire
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Just finished up a 60MM DEFI BF Boost (Imperial) gauge install with CUII.
When the opening ceremony starts, its does the full sweep forward but coming back it ticks. Just wondering if this was normal?
Also, I was tuned for 22PSI. The Defi peaked at 24PSI. Are defi's inaccurate?
Thanks in advance.
When the opening ceremony starts, its does the full sweep forward but coming back it ticks. Just wondering if this was normal?
Also, I was tuned for 22PSI. The Defi peaked at 24PSI. Are defi's inaccurate?
Thanks in advance.
#14
Evolved Member
iTrader: (11)
Join Date: Oct 2004
Location: Boston
Posts: 1,456
Likes: 0
Received 0 Likes
on
0 Posts
No there is no restrictor in the T. If your gauge was reading 10psi or 30psi i would worry. You dont have a problem.
Opening ceremony is supposed to be like that. The lights just flash very quickly and give it the "ticking" effect. Needle is actually moving at a constant speed.
Opening ceremony is supposed to be like that. The lights just flash very quickly and give it the "ticking" effect. Needle is actually moving at a constant speed.
#15
Account Disabled
iTrader: (2)
Join Date: Dec 2005
Location: ATX
Posts: 655
Likes: 0
Received 0 Likes
on
0 Posts
My tee didn't come with a restrictor. My Blitz SBC boost controler and Defi are reading the same but they are using the same signal source.
Last edited by milo; Aug 2, 2007 at 10:05 AM.