Tracer

pics or vendors?

nukblazi

The upper portion of the back seat fits but needs to be stuffed in. There's a thread on the board about modifying the back seat to have it fit better. I had my back seat in unmodified for a while, then I installed the beat rush bulkhead divider... FTW ;p

The third picture is the seat all the way back, in an upright (correct) driving position.

BenJ

iTrader: (21)

all I have to say is be careful in getting a rollbar or cage for a street car....the last thing that you want is to get into an accident on the street and bang your helmetless head on the bar....just my $0.02

boostGotMeLaid

iTrader: (6)

do they sell 8 points?? any pics??

boostGotMeLaid

iTrader: (6)

cant u put foam on the bars??

nukblazi

Yes, however, the autopower sits slightly behind the drivers head even fully back. If you are in a situation where you're head can hit the autopower rollbar main hoop, you are **** out of luck anyway.

+1 for your point about the cage and helmetless head, Ben.

lexat20

iTrader: (24)

You can but how much will a 1.5" thick piece of foam help when your head hits the bar at 40mph

mick82907

iTrader: (8)

I can't find the thread on modifying the rear seats in order for the cage to fit. If I can not put this cage in without removing the rear seats permenantly then I am not going to get the cage.