SlowEvo-IX

Hey guys just replaced my filter with buschur filter. It came with an L bracket that is supposed to support the intake pipe and filter from moving around. My question...where the hell does this attach to? Please help, thank you all!!

-Don

MitsuJDM

iTrader: (6)

I"ll do my best to describe it without a picture. It connects to th lower front bolt of the MAF sensor/filter and to the one pre-existing whole the airbox bolted into to which will be right under the tip on the cone filter.

It's just a support bracket.

newbieEVO8

iTrader: (9)

Neither I nor mellon use that support bracket.

It is really not needed IMHO.

mrich82

iTrader: (10)

I didn't use the bracket either... intake doesn't move around much without it.

mdinubil

The L bracket has a long and a short end. I believe the short end is attached to the bottom bolt closest to the steering wheel or firewall on the filter (one of the 4 that you just attached) When it is attached, the other end of the (L) bracket sticks straight out toward the drivers side front wheel. There is a bolt in the frame that needs to be unscrewed and reused. The instructions tell you to use one of the bolts from the air cleaner that you removed but i did not find it necesassary. I just installed mine a couple weeks ago. Hope this helps

dubbleugly01

iTrader: (24)

you can get by without it, no problems.