JETBLUE

I purchased the se lip and had it painted and attatched to my bumper. I inspected the lip and believe that that it will not bolt right up to the undertray. I could be wrong but is there any other hardware that is needed? it even looks like there is something missing on the right side of the lip in the picture.

RussellM

iTrader: (256)

The only difference is the parts I highlighted in the picture.

RussellM

iTrader: (256)

62026 is the insert you are missing on the right side of the lip on the underside. (sorry forgot to mention that, but you should see it in the picture.)

JETBLUE

thanks for the help....any additional screws or clips?

Spins4

iTrader: (122)

Just rivets, and those annoying plastic push screws that we have. I sold like 50 of those lips between the 2 Mitsu dealerships I was at. The three pieces Russell pointed out are necessary if you are running the splash shield. As you can see, it is because of the way the lip is cut differently than the stock IX lip.

Now you may want to double check, but the part numbers you need are:

6512A151 & 6512A152 (left and right brackets)
6400B288 (filler piece, only comes in black).

Like I said, you may want to double check those numbers. I am just trying to remeber them off the top of my head.