KS_Evo9

Will this fit on a evo 9 ? Plz help

http://www.lancershop.com/customer/p...&cat=91&page=1

grillpt

iTrader: (24)

Yes, but try to find it elsewhere. I would stay away from LancerShop if I were you.

Not bashing LS (too much) but I've gotten better CS from the cable company...

chaotichoax

iTrader: (149)

I'd suggest doing more research on that mani

and if you do decide to get it

you MUST replace the gaskets with OEM...do not use the provided ones

evokel

iTrader: (10)

^yeah i have that mani and its a ok mani.
it is known to crack and you have to use the oem gaskets or your in for trouble.
i suggest porting and coating your stock mani

BOOSTEZ

iTrader: (1)

I was actually going to make a thread on this very topic. I've had the mani for 2 years with several hundred start/stop cycles of the engine and have yet to crack this manifold. Anyone else have the same luck?

hamx0r

iTrader: (49)

im had the same luck... i guess it is the pick of the litter maybe but i love my manifold lol... a lot of 140mph races and it still hasn't cracked but i guess it depends which one you get...but the engine does get louder because of the thinner piping of the megan manifold compared to the stocker

gsrboi80

iTrader: (38)

No cracks in mine at all

evokel

iTrader: (10)

lucky, mines been a year, kinda and finally cracked

KS_Evo9

Can I just use the old gasket on the stock mani ?

hamx0r

iTrader: (49)

yeah you can use the stock manifold gasket... that is what i did and it hasnt leaking so far

huevosrancheros

iTrader: (14)

your better getting off a ported and jetted stock mani. Look into buschur or egay. I have seen ported and coated stock mannys on egay. Tubular mannys usually crack after a while.

KS_Evo9

I just orderd the megan mani with NEW oem gaskets. Im getting the megan for temp use that way i can drive my car when i send in my stock mani to buschur. Prob be a few months before I buy the port/coat but I will eventually. Whats so good about stock ported coated BTW?

KS_Evo9

Bump For Me

evohang

iTrader: (1)

Its pretty self explanitory that ported and coated is better then a manifold that will crack. Right? But if you are going to port/coat go to http://www.paradigmperformance.net/ their coating and porting is Excellent. I really recommend them.

Burklow

iTrader: (3)

Look at some of the Buschur options for the stock manifold.