Which wideband to get... AEM or Zeitronix Zt-2 ??
Apr 11, 2008, 04:57 AM
#16
The AEM UEGO has an RS232 outout and an analog 0-5V output for data logging. You can use hte RS232 to log with EVOScan using a serial cable to the PC and the USB Tactrix Cable to log with EVOScan with the OBD2. It logs but you need a PC connected to log the data and two cables (Tactrix and Serial). The 0-5 is for non stock EMS systems.
Apr 11, 2008, 06:12 AM
#18
Evolved Member
iTrader: (31)
Join Date: Jan 2006
Location: mASSachusetts
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
They just did a comparison of a whole bunch of WB's not that long ago.
Zeitronix hung with WB's costing 4x as much. I believe the AEM didn't rate so high because of inconsistent readings...
Zeitronix hung with WB's costing 4x as much. I believe the AEM didn't rate so high because of inconsistent readings...
Apr 11, 2008, 07:31 AM
#19
Account Disabled
AEM Uego you can log using stock ecu and evoscan. there is a thread on where to attach the serial output wire to the rs232 connector to your computer.
works great
works great
Apr 11, 2008, 07:33 AM
#20
Account Disabled
actually yoru wrong, i saw that test and AEM was mostly ontop 1-2 on every test.
i will have to try to find that thread and post it.
i will have to try to find that thread and post it.
Apr 14, 2008, 08:04 PM
#24
Evolved Member
iTrader: (31)
Join Date: Jan 2006
Location: mASSachusetts
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
well.... subscribe! 
edit: even better, read this thread: https://www.evolutionm.net/forums/sh...d.php?t=325408
This was the one I was actually talking about earlier. When I searched the first time, I saw the pipe with all the bungs and thought that was the one. I was wrong. This was the one.
edit: even better, read this thread: https://www.evolutionm.net/forums/sh...d.php?t=325408
This was the one I was actually talking about earlier. When I searched the first time, I saw the pipe with all the bungs and thought that was the one. I was wrong. This was the one.
Last edited by tony_b; Apr 14, 2008 at 08:10 PM.
Apr 14, 2008, 08:11 PM
#28
Ooh, Innovate is VERY good. I would suggest that! 
I know I just said that I have AEM, but in all honesty, when I bought mine, my buddy had the AEM in stock, so I just went with that. I probably should have gone with the Innovate, but the AEM has been great. I am happy with the AEM.
I know I just said that I have AEM, but in all honesty, when I bought mine, my buddy had the AEM in stock, so I just went with that. I probably should have gone with the Innovate, but the AEM has been great. I am happy with the AEM.
Jan 20, 2013, 01:38 PM
#29
Evolving Member
iTrader: (12)
Join Date: May 2010
Location: Strasburg, P.A.
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
To bring this back from the dead. I have the aem wideband with my ems 2. I used to have the zt-2 in my car before i went to the aem standalone. I have the gruppe s triple pod with the aem wideband,boost and oil pressure. I've come to the conclussion im going to take the aem gauges out and go with the zt-2 again. I love he fact that you dont have to watching the gauge all the time. The zeitronix has a peak button, that tells you your peak afr, and boost and such for your previous run, or pull. Personally if you have a high powered car, you can't always be taking your eyes off the road to look at a gauge. Thats 3/4 the reason I'm putting th ezt-2 back in.
Jan 20, 2013, 04:57 PM
#30
Evolving Member
Join Date: Oct 2012
Location: north Jersey
Posts: 246
Likes: 0
Received 0 Likes
on
0 Posts
I've had UEGOs in my last two cars, so I'm a little bias, and I've never seen the zt-2 in person. However I can say multiple AEM users have reported issues with them reading lean. Mine was a bit different than my tuners readings on the dyno, FWIW
Posted from Evolutionm.net App for Android
Posted from Evolutionm.net App for Android